Logo Search packages:      
Sourcecode: iaxmodem version File versions  Download package

t30.c

Go to the documentation of this file.
#define ENABLE_V17
/*
 * SpanDSP - a series of DSP components for telephony
 *
 * t30.c - ITU T.30 FAX transfer processing
 *
 * Written by Steve Underwood <steveu@coppice.org>
 *
 * Copyright (C) 2003, 2004, 2005, 2006 Steve Underwood
 *
 * All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2, as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * $Id: t30.c,v 1.144 2006/11/01 12:58:20 steveu Exp $
 */

/*! \file */

#ifdef HAVE_CONFIG_H
#include <config.h>
#endif

#include <stdlib.h>
#include <stdio.h>
#include <inttypes.h>
#include <string.h>
#include <fcntl.h>
#include <time.h>
#include <tgmath.h>
#include <tiffio.h>

#include "spandsp/telephony.h"
#include "spandsp/logging.h"
#include "spandsp/bit_operations.h"
#include "spandsp/queue.h"
#include "spandsp/power_meter.h"
#include "spandsp/complex.h"
#include "spandsp/tone_generate.h"
#include "spandsp/async.h"
#include "spandsp/hdlc.h"
#include "spandsp/fsk.h"
#include "spandsp/v29rx.h"
#include "spandsp/v29tx.h"
#include "spandsp/v27ter_rx.h"
#include "spandsp/v27ter_tx.h"
#include "spandsp/t4.h"

#include "spandsp/t30_fcf.h"
#include "spandsp/t35.h"
#include "spandsp/t30.h"

#define MAX_MESSAGE_TRIES   3

#define ms_to_samples(t)    (((t)*SAMPLE_RATE)/1000)

typedef struct
{
    int val;
    const char *str;
} value_string_t;

/* T.30 defines the following call phases:
   Phase A: Call set-up.
       Exchange of CNG, CED and the called terminal identification.
   Phase B: Pre-message procedure for identifying and selecting the required facilities.
       Capabilities negotiation, and training, up the the confirmation to receive.
   Phase C: Message transmission (includes phasing and synchronization where appropriate).
       Transfer of the message at high speed.
   Phase D: Post-message procedure, including end-of-message and confirmation and multi-document procedures.
       End of message and acknowledgement.
   Phase E: Call release
       Final call disconnect. */
enum
{
    T30_PHASE_IDLE = 0,     /* Freshly initialised */
    T30_PHASE_A_CED,        /* Doing the CED (answer) sequence */
    T30_PHASE_A_CNG,        /* Doing the CNG (caller) sequence */
    T30_PHASE_B_RX,         /* Receiving pre-message control messages */
    T30_PHASE_B_TX,         /* Transmitting pre-message control messages */
    T30_PHASE_C_NON_ECM_RX, /* Receiving a document message in non-ECM mode */
    T30_PHASE_C_NON_ECM_TX, /* Transmitting a document message in non-ECM mode */
    T30_PHASE_C_ECM_RX,     /* Receiving a document message in ECM (HDLC) mode */
    T30_PHASE_C_ECM_TX,     /* Transmitting a document message in ECM (HDLC) mode */
    T30_PHASE_D_RX,         /* Receiving post-message control messages */
    T30_PHASE_D_TX,         /* Transmitting post-message control messages */
    T30_PHASE_E,            /* In phase E */
    T30_PHASE_CALL_FINISHED /* Call completely finished */
};

static const char *phase_names[] =
{
    "T30_PHASE_IDLE",
    "T30_PHASE_A_CED",
    "T30_PHASE_A_CNG",
    "T30_PHASE_B_RX",
    "T30_PHASE_B_TX",
    "T30_PHASE_C_NON_ECM_RX",
    "T30_PHASE_C_NON_ECM_TX",
    "T30_PHASE_C_ECM_RX",
    "T30_PHASE_C_ECM_TX",
    "T30_PHASE_D_RX",
    "T30_PHASE_D_TX",
    "T30_PHASE_E",
    "T30_PHASE_CALL_FINISHED"
};

/* These state names are modelled after places in the T.30 flow charts. */
enum
{
    T30_STATE_ANSWERING = 1,
    T30_STATE_B,
    T30_STATE_C,
    T30_STATE_D,
    T30_STATE_D_TCF,
    T30_STATE_D_POST_TCF,
    T30_STATE_F_TCF,
    T30_STATE_F_CFR,
    T30_STATE_F_FTT,
    T30_STATE_F_DOC,
    T30_STATE_F_POST_DOC_NON_ECM,
    T30_STATE_F_POST_DOC_ECM,
    T30_STATE_F_POST_RCP_MCF,
    T30_STATE_F_POST_RCP_PPR,
    T30_STATE_R,
    T30_STATE_T,
    T30_STATE_I,
    T30_STATE_II,
    T30_STATE_II_Q,
    T30_STATE_III_Q_MCF,
    T30_STATE_III_Q_RTP,
    T30_STATE_III_Q_RTN,
    T30_STATE_IV,
    T30_STATE_IV_PPS_NULL,
    T30_STATE_IV_PPS_Q,
    T30_STATE_IV_PPS_RNR,
    T30_STATE_IV_CTC,
    T30_STATE_IV_EOR,
    T30_STATE_IV_EOR_RNR,
    T30_STATE_CALL_FINISHED
};

enum
{
    T30_MODE_SEND_DOC = 1,
    T30_MODE_RECEIVE_DOC
};

enum
{
    T30_COPY_QUALITY_GOOD = 0,
    T30_COPY_QUALITY_POOR,
    T30_COPY_QUALITY_BAD
};

#define DISBIT1     0x01
#define DISBIT2     0x02
#define DISBIT3     0x04
#define DISBIT4     0x08
#define DISBIT5     0x10
#define DISBIT6     0x20
#define DISBIT7     0x40
#define DISBIT8     0x80

/* All timers specified in milliseconds */

/* Time-out T0 defines the amount of time an automatic calling terminal waits for the called terminal
to answer the call.
T0 begins after the dialling of the number is completed and is reset:
a)       when T0 times out; or
b)       when timer T1 is started; or
c)       if the terminal is capable of detecting any condition which indicates that the call will not be
         successful, when such a condition is detected.
The recommended value of T0 is 60+-5s; however, when it is anticipated that a long call set-up
time may be encountered, an alternative value of up to 120s may be used.
NOTE - National regulations may require the use of other values for T0. */
#define DEFAULT_TIMER_T0            60000

/* Time-out T1 defines the amount of time two terminals will continue to attempt to identify each
other. T1 is 35+-5s, begins upon entering phase B, and is reset upon detecting a valid signal or
when T1 times out.
For operating methods 3 and 4 (see 3.1), the calling terminal starts time-out T1 upon reception of
the V.21 modulation scheme.
For operating method 4 bis a (see 3.1), the calling terminal starts time-out T1 upon starting
transmission using the V.21 modulation scheme. */
#define DEFAULT_TIMER_T1            35000

/* Time-out T2 makes use of the tight control between commands and responses to detect the loss of
command/response synchronization. T2 is 6+-1s and begins when initiating a command search
(e.g., the first entrance into the "command received" subroutine, reference flow diagram in 5.2).
T2 is reset when an HDLC flag is received or when T2 times out. */
#define DEFAULT_TIMER_T2            7000

/* Time-out T3 defines the amount of time a terminal will attempt to alert the local operator in
response to a procedural interrupt. Failing to achieve operator intervention, the terminal will
discontinue this attempt and shall issue other commands or responses. T3 is 10+-5s, begins on the
first detection of a procedural interrupt command/response signal (i.e., PIN/PIP or PRI-Q) and is
reset when T3 times out or when the operator initiates a line request. */
#define DEFAULT_TIMER_T3            15000

/* NOTE - For manual FAX units, the value of timer T4 may be either 3.0s +-15% or 4.5s +-15%.
If the value of 4.5s is used, then after detection of a valid response to the first DIS, it may
be reduced to 3.0s +-15%. T4 = 3.0s +-15% for automatic units. */
#define DEFAULT_TIMER_T4            3450

/* Time-out T5 is defined for the optional T.4 error correction mode. Time-out T5 defines the amount
of time waiting for clearance of the busy condition of the receiving terminal. T5 is 60+-5s and
begins on the first detection of the RNR response. T5 is reset when T5 times out or the MCF or PIP
response is received or when the ERR or PIN response is received in the flow control process after
transmitting the EOR command. If the timer T5 has expired, the DCN command is transmitted for
call release. */
#define DEFAULT_TIMER_T5            65000

#define DEFAULT_TIMER_T6            5000

#define DEFAULT_TIMER_T7            6000

#define DEFAULT_TIMER_T8            10000

/* Exact widths in PELs for the difference resolutions, and page widths:
    R4    864 pels/215mm for ISO A4, North American Letter and Legal
    R4   1024 pels/255mm for ISO B4
    R4   1216 pels/303mm for ISO A3
    R8   1728 pels/215mm for ISO A4, North American Letter and Legal
    R8   2048 pels/255mm for ISO B4
    R8   2432 pels/303mm for ISO A3
    R16  3456 pels/215mm for ISO A4, North American Letter and Legal
    R16  4096 pels/255mm for ISO B4
    R16  4864 pels/303mm for ISO A3
*/

#define T30_V17_FALLBACK_START          0
#define T30_V29_FALLBACK_START          3
#define T30_V27TER_FALLBACK_START       6

static const struct
{
    int bit_rate;
    int modem_type;
    uint8_t dcs_code;
} fallback_sequence[] =
{
    {14400, T30_MODEM_V17_14400,    DISBIT6},
    {12000, T30_MODEM_V17_12000,    (DISBIT6 | DISBIT4)},
    { 9600, T30_MODEM_V17_9600,     (DISBIT6 | DISBIT3)},
    { 9600, T30_MODEM_V29_9600,     DISBIT3},
    { 7200, T30_MODEM_V17_7200,     (DISBIT6 | DISBIT4 | DISBIT3)},
    { 7200, T30_MODEM_V29_7200,     (DISBIT4 | DISBIT3)},
    { 4800, T30_MODEM_V27TER_4800,  DISBIT4},
    { 2400, T30_MODEM_V27TER_2400,  0},
    {    0, 0, 0}
};

static void queue_phase(t30_state_t *s, int phase);
static void set_phase(t30_state_t *s, int phase);
static void set_state(t30_state_t *s, int state);
static void send_simple_frame(t30_state_t *s, int type);
static void send_frame(t30_state_t *s, const uint8_t *fr, int frlen);
static void send_dcn(t30_state_t *s);
static void repeat_last_command(t30_state_t *s);
static void disconnect(t30_state_t *s);
static void decode_20digit_msg(t30_state_t *s, char *msg, const uint8_t *pkt, int len);
static void decode_url_msg(t30_state_t *s, char *msg, const uint8_t *pkt, int len);

static void rx_start_page(t30_state_t *s)
{
    int i;

    t4_rx_set_image_width(&(s->t4), s->image_width);
    t4_rx_set_sub_address(&(s->t4), s->far_sub_address);
    t4_rx_set_far_ident(&(s->t4), s->far_ident);
    t4_rx_set_vendor(&(s->t4), s->vendor);
    t4_rx_set_model(&(s->t4), s->model);

    t4_rx_set_rx_encoding(&(s->t4), s->line_encoding);
    t4_rx_set_y_resolution(&(s->t4), s->y_resolution);

    t4_rx_start_page(&(s->t4));
    /* Clear the buffer */
    for (i = 0;  i < 256;  i++)
        s->ecm_len[i] = -1;
    s->ecm_frames = -1;
    s->ecm_page++;
    s->ecm_block = 0;
}
/*- End of function --------------------------------------------------------*/

static int copy_quality(t30_state_t *s)
{
    t4_stats_t stats;

    /* There is no specification for judging copy quality. However, we need to classify
       it at three levels, to control what we do next: OK; tolerable, but retrain;
       intolerable, so retrain. */
    t4_get_transfer_statistics(&(s->t4), &stats);
    span_log(&s->logging, SPAN_LOG_FLOW, "Pages = %d\n", stats.pages_transferred);
    span_log(&s->logging, SPAN_LOG_FLOW, "Image size = %dx%d\n", stats.width, stats.length);
    span_log(&s->logging, SPAN_LOG_FLOW, "Image resolution = %dx%d\n", stats.x_resolution, stats.y_resolution);
    span_log(&s->logging, SPAN_LOG_FLOW, "Bad rows = %d\n", stats.bad_rows);
    span_log(&s->logging, SPAN_LOG_FLOW, "Longest bad row run = %d\n", stats.longest_bad_row_run);
    if (stats.bad_rows*50 < stats.length)
        return T30_COPY_QUALITY_GOOD;
    if (stats.bad_rows*20 < stats.length)
        return T30_COPY_QUALITY_POOR;
    return T30_COPY_QUALITY_BAD;
}
/*- End of function --------------------------------------------------------*/

00320 const char *t30_completion_code_to_str(int result)
{
    switch (result)
    {
    case T30_ERR_OK:
        return "OK";
    case T30_ERR_CEDTONE:
        return "The CED tone exceeded 5s";
    case T30_ERR_T0EXPIRED:
        return "Timed out waiting for initial communication";
    case T30_ERR_T1EXPIRED:
        return "Timed out waiting for the first message";
    case T30_ERR_T3EXPIRED:
        return "Timed out waiting for procedural interrupt";
    case T30_ERR_HDLCCARR:
        return "The HDLC carrier did not stop in a timely manner";
    case T30_ERR_CANNOTTRAIN:
        return "Failed to train with any of the compatible modems";
    case T30_ERR_OPERINTFAIL:
        return "Operator intervention failed";
    case T30_ERR_INCOMPATIBLE:
        return "Far end is not compatible";
    case T30_ERR_NOTRXCAPABLE:
        return "Far end is not receive capable";
    case T30_ERR_NOTTXCAPABLE:
        return "Far end is not transmit capable";
    case T30_ERR_UNEXPECTED:
        return "Unexpected message received";
    case T30_ERR_NORESSUPPORT:
        return "Far end cannot receive at the resolution of the image";
    case T30_ERR_NOSIZESUPPORT:
        return "Far end cannot receive at the size of image";
    case T30_ERR_FILEERROR:
        return "TIFF/F file cannot be opened";
    case T30_ERR_NOPAGE:
        return "TIFF/F page not found";
    case T30_ERR_BADTIFF:
        return "TIFF/F format is not compatible";
    case T30_ERR_UNSUPPORTED:
        return "Unsupported feature";
    case T30_ERR_BADDCSTX:
        return "Received bad response to DCS or training";
    case T30_ERR_BADPGTX:
        return "Received a DCN from remote after sending a page";
    case T30_ERR_ECMPHDTX:
        return "Invalid ECM response received from receiver";
    case T30_ERR_ECMRNRTX:
        return "Timer T5 expired, receiver not ready";
    case T30_ERR_GOTDCNTX:
        return "Received a DCN while waiting for a DIS";
    case T30_ERR_INVALRSPTX:
        return "Invalid response after sending a page";
    case T30_ERR_NODISTX:
        return "Received other than DIS while waiting for DIS";
    case T30_ERR_NXTCMDTX:
        return "Timed out waiting for next send_page command from driver";
    case T30_ERR_PHBDEADTX:
        return "Received no response to DCS, training or TCF";
    case T30_ERR_PHDDEADTX:
        return "No response after sending a page";
    case T30_ERR_ECMPHDRX:
        return "Invalid ECM response received from transmitter";
    case T30_ERR_GOTDCSRX:
        return "DCS received while waiting for DTC";
    case T30_ERR_INVALCMDRX:
        return "Unexpected command after page received";
    case T30_ERR_NOCARRIERRX:
        return "Carrier lost during fax receive";
    case T30_ERR_NOEOLRX:
        return "Timed out while waiting for EOL (end Of line)";
    case T30_ERR_NOFAXRX:
        return "Timed out while waiting for first line";
    case T30_ERR_NXTCMDRX:
        return "Timed out waiting for next receive page command";
    case T30_ERR_T2EXPDCNRX:
        return "Timer T2 expired while waiting for DCN";
    case T30_ERR_T2EXPDRX:
        return "Timer T2 expired while waiting for phase D";
    case T30_ERR_T2EXPFAXRX:
        return "Timer T2 expired while waiting for fax page";
    case T30_ERR_T2EXPMPSRX:
        return "Timer T2 expired while waiting for next fax page";
    case T30_ERR_T2EXPRRRX:
        return "Timer T2 expired while waiting for RR command";
    case T30_ERR_T2EXPRX:
        return "Timer T2 expired while waiting for NSS, DCS or MCF";
    case T30_ERR_DCNWHYRX:
        return "Unexpected DCN while waiting for DCS or DIS";
    case T30_ERR_DCNDATARX:
        return "Unexpected DCN while waiting for image data";
    case T30_ERR_DCNFAXRX:
        return "Unexpected DCN while waiting for EOM, EOP or MPS";
    case T30_ERR_DCNPHDRX:
        return "Unexpected DCN after EOM or MPS sequence";
    case T30_ERR_DCNRRDRX:
        return "Unexpected DCN after RR/RNR sequence";
    case T30_ERR_DCNNORTNRX:
        return "Unexpected DCN after requested retransmission";
    case T30_ERR_BADPAGE:
        return "TIFF/F page number tag missing";
    case T30_ERR_BADTAG:
        return "Incorrect values for TIFF/F tags";
    case T30_ERR_BADTIFFHDR:
        return "Bad TIFF/F header - incorrect values in fields";
    case T30_ERR_BADPARM:
        return "Invalid value for fax parameter";
    case T30_ERR_BADSTATE:
        return "Invalid initial state value specified";
    case T30_ERR_CMDDATA:
        return "Last command contained invalid data";
    case T30_ERR_DISCONNECT:
        return "Fax call disconnected by the other station";
    case T30_ERR_INVALARG:
        return "Illegal argument to function";
    case T30_ERR_INVALFUNC:
        return "Illegal call to function";
    case T30_ERR_NODATA:
        return "Data requested is not available (NSF, DIS, DCS)";
    case T30_ERR_NOMEM:
        return "Cannot allocate memory for more pages";
    case T30_ERR_NOPOLL:
        return "Poll not accepted";
    case T30_ERR_NOSTATE:
        return "Initial state value not set";
    case T30_ERR_RETRYDCN:
        return "Disconnected after permitted retries";
    case T30_ERR_CALLDROPPED:
        return "The call dropped prematurely";
    }
    return "???";
}
/*- End of function --------------------------------------------------------*/

00453 void t30_non_ecm_put_bit(void *user_data, int bit)
{
    t30_state_t *s;
    int was_trained;

    s = (t30_state_t *) user_data;
    if (bit < 0)
    {
        /* Special conditions */
        switch (bit)
        {
        case PUTBIT_TRAINING_FAILED:
            span_log(&s->logging, SPAN_LOG_FLOW, "Non-ECM carrier training failed in state %d\n", s->state);
            s->rx_trained = FALSE;
            /* Cancel the timer, since we have actually seen something, and wait until the carrier drops
               before proceeding. */
            // TODO: this is not a complete answer to handling failures to train
            s->timer_t2_t4 = 0;
            break;
        case PUTBIT_TRAINING_SUCCEEDED:
            /* The modem is now trained */
            span_log(&s->logging, SPAN_LOG_FLOW, "Non-ECM carrier trained in state %d\n", s->state);
            /* In case we are in trainability test mode... */
            /* A FAX machine is supposed to send 1.5s of training test
               data, but some send a little bit less. Lets just check
               the first 1s, and be safe. */
            s->training_current_zeros = 0;
            s->training_most_zeros = 0;
            s->rx_signal_present = TRUE;
            s->rx_trained = TRUE;
            s->timer_t2_t4 = 0;
            break;
        case PUTBIT_CARRIER_UP:
            span_log(&s->logging, SPAN_LOG_FLOW, "Non-ECM carrier up in state %d\n", s->state);
            break;
        case PUTBIT_CARRIER_DOWN:
            span_log(&s->logging, SPAN_LOG_FLOW, "Non-ECM carrier down in state %d\n", s->state);
            was_trained = s->rx_trained;
            s->rx_signal_present = FALSE;
            s->rx_trained = FALSE;
            switch (s->state)
            {
            case T30_STATE_F_TCF:
                /* Only respond if we managed to actually sync up with the source. We don't
                   want to respond just because we saw a click. These often occur just
                   before the real signal, with many modems. Presumably this is due to switching
                   within the far end modem. We also want to avoid the possibility of responding
                   to the tail end of any slow modem signal. If there was a genuine data signal
                   which we failed to train on it should not matter. If things are that bad, we
                   do not stand much chance of good quality communications. */
                if (was_trained)
                {
                    /* Although T.30 says the training test should be 1.5s of all 0's, some FAX
                       machines send a burst of all 1's before the all 0's. Tolerate this. */
                    if (s->training_current_zeros > s->training_most_zeros)
                        s->training_most_zeros = s->training_current_zeros;
                    if (s->training_most_zeros < fallback_sequence[s->current_fallback].bit_rate)
                    {
                        span_log(&s->logging, SPAN_LOG_FLOW, "Trainability test failed - longest run of zeros was %d\n", s->training_most_zeros);
                        set_phase(s, T30_PHASE_B_TX);
                        set_state(s, T30_STATE_F_FTT);
                        send_simple_frame(s, T30_FTT);
                    }
                    else
                    {
                        /* The training went OK */
                        s->short_train = TRUE;
                        s->in_message = TRUE;
                        rx_start_page(s);
                        set_phase(s, T30_PHASE_B_TX);
                        set_state(s, T30_STATE_F_CFR);
                        send_simple_frame(s, T30_CFR);
                    }
                }
                break;
            case T30_STATE_F_POST_DOC_NON_ECM:
                /* Page ended cleanly */
                break;
            default:
                /* We should be receiving a document right now, but it did not end cleanly. */
                if (was_trained)
                {
                    span_log(&s->logging, SPAN_LOG_WARNING, "Page did not end cleanly\n");
                    /* We trained OK, so we should have some kind of received page, even though
                       it did not end cleanly. */
                    set_state(s, T30_STATE_F_POST_DOC_NON_ECM);
                    set_phase(s, T30_PHASE_D_RX);
                    s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T2);
                    s->timer_is_t4 = FALSE;
                    if (s->current_status == T30_ERR_NOCARRIERRX)
                        s->current_status = T30_ERR_OK;
                }
                else
                {
                    span_log(&s->logging, SPAN_LOG_WARNING, "Non-ECM carrier not found\n");
                    s->current_status = T30_ERR_NOCARRIERRX;
                }
                break;
            }
            if (s->next_phase != T30_PHASE_IDLE)
            {
                set_phase(s, s->next_phase);
                s->next_phase = T30_PHASE_IDLE;
            }
            break;
        default:
            span_log(&s->logging, SPAN_LOG_WARNING, "Unexpected non-ECM special bit - %d!\n", bit);
            break;
        }
        return;
    }
    switch (s->state)
    {
    case T30_STATE_F_TCF:
        /* Trainability test */
        if (bit)
        {
            if (s->training_current_zeros > s->training_most_zeros)
                s->training_most_zeros = s->training_current_zeros;
            s->training_current_zeros = 0;
        }
        else
        {
            s->training_current_zeros++;
        }
        break;
    case T30_STATE_F_DOC:
        /* Document transfer */
        if (t4_rx_put_bit(&(s->t4), bit))
        {
            /* That is the end of the document */
            set_state(s, T30_STATE_F_POST_DOC_NON_ECM);
            queue_phase(s, T30_PHASE_D_RX);
            s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T2);
            s->timer_is_t4 = FALSE;
        }
        break;
    }
}
/*- End of function --------------------------------------------------------*/

00594 void t30_non_ecm_putbyte(void *user_data, int byte)
{
    t30_state_t *s;
    int i;

    s = (t30_state_t *) user_data;
    switch (s->state)
    {
    case T30_STATE_F_TCF:
        /* Trainability test */
        if (byte == 0)
        {
            s->training_current_zeros += 8;
        }
        else
        {
            for (i = 7;  i >= 0;  i--)
            {
                if (((byte >> i) & 1))
                {
                    if (s->training_current_zeros > s->training_most_zeros)
                        s->training_most_zeros = s->training_current_zeros;
                    s->training_current_zeros = 0;
                }
                else
                {
                    s->training_current_zeros++;
                }
            }
        }
        break;
    case T30_STATE_F_DOC:
        /* Document transfer */
        for (i = 7;  i >= 0;  i--)
        {
            if (t4_rx_put_bit(&(s->t4), (byte >> i) & 1))
            {
                /* That is the end of the document */
                set_state(s, T30_STATE_F_POST_DOC_NON_ECM);
                queue_phase(s, T30_PHASE_D_RX);
                s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T2);
                s->timer_is_t4 = FALSE;
            }
        }
        break;
    }
}
/*- End of function --------------------------------------------------------*/

00643 int t30_non_ecm_get_bit(void *user_data)
{
    int bit;
    t30_state_t *s;

    s = (t30_state_t *) user_data;
    switch (s->state)
    {
    case T30_STATE_D_TCF:
        /* Trainability test. */
        bit = 0;
        if (s->training_test_bits-- < 0)
        {
            /* Finished sending training test. */
            bit = PUTBIT_END_OF_DATA;
        }
        break;
    case T30_STATE_I:
        /* Transferring real data. */
        bit = t4_tx_get_bit(&(s->t4));
        break;
    case T30_STATE_D_POST_TCF:
    case T30_STATE_II_Q:
        /* We should be padding out a block of samples if we are here */
        bit = 0;
        break;
    default:
        span_log(&s->logging, SPAN_LOG_WARNING, "t30_non_ecm_get_bit in bad state %d\n", s->state);
        bit = 2;
        break;
    }
    return bit;
}
/*- End of function --------------------------------------------------------*/

static int check_next_tx_step(t30_state_t *s)
{
    int more;

    if (t4_tx_more_pages(&(s->t4)) == 0)
        return (s->local_interrupt_pending)  ?  T30_PRI_MPS  :  T30_MPS;
    /* Call a user handler, if one is set, to check if another document is to be sent.
       If so, we send an EOM, rather than an EOP. Then we will renegotiate, and the new
       document will begin. */
    if (s->document_handler)
        more = s->document_handler(s, s->document_user_data, 0);
    else
        more = FALSE;
    if (more)
        return (s->local_interrupt_pending)  ?  T30_PRI_EOM  :  T30_EOM;
    return (s->local_interrupt_pending)  ?  T30_PRI_EOP  :  T30_EOP;
}
/*- End of function --------------------------------------------------------*/

static int get_partial_ecm_page(t30_state_t *s)
{
    int i;
    int j;
    int k;
    int bit;
    uint8_t octet;

    s->ppr_count = 0;
    /* Fill our partial page buffer with a partial page. Use the negotiated preferred frame size
       as the basis for the size of the frames produced. */
    /* We fill the buffer with complete HDLC frames, ready to send out. */
    /* The frames are all marked as not being final frames. When sent, the are followed by a partial
       page signal, which is marked as the final frame. */
    for (i = 0;  i < 256;  i++)
        s->ecm_len[i] = -1;
    for (i = 3;  i < 32 + 3;  i++)
        s->ecm_frame_map[i] = 0xFF;
    for (i = 0;  i < 256;  i++)
    {
        s->ecm_data[i][0] = 0xFF;
        s->ecm_data[i][1] = 0x03;
        s->ecm_data[i][2] = T4_FCD;
        /* These frames contain a frame sequence number within the partial page (one octet) followed
           by some image data. */
        s->ecm_data[i][3] = i;
        for (j = 4;  j < s->octets_per_ecm_frame + 4;  j++)
        {
            octet = 0;
            for (k = 0;  k < 8;  k++)
            {
                if (((bit = t4_tx_get_bit(&(s->t4)))) == PUTBIT_END_OF_DATA)
                {
                    if (k > 0)
                        s->ecm_data[i][j++] = octet >> (7 - k);
                    if (j > 0)
                    {
                        memset(&s->ecm_data[i][j], 0, s->octets_per_ecm_frame + 4 - j);
                        s->ecm_len[i++] = s->octets_per_ecm_frame + 4;
                    }
                    /* The image is not big enough to fill the entire buffer */
                    /* We need to pad to a full frame, as most receivers expect
                       that. */
                    s->ecm_frames = i;
                    span_log(&s->logging, SPAN_LOG_FLOW, "Partial page buffer contains %d frames (%d per frame)\n", i, s->octets_per_ecm_frame);
                    s->ecm_at_page_end = TRUE;
                    return i;
                }
                octet = (octet >> 1) | ((bit & 1) << 7);
            }
            s->ecm_data[i][j] = octet;
        }
        s->ecm_len[i] = j;
    }
    /* We filled the entire buffer */
    s->ecm_frames = 256;
    span_log(&s->logging, SPAN_LOG_FLOW, "Partial page buffer full (%d per frame)\n", s->octets_per_ecm_frame);
    s->ecm_at_page_end = ((t4_tx_check_bit(&(s->t4)) & 2) != 0);
    return 256;
}
/*- End of function --------------------------------------------------------*/

static int t30_ecm_commit_partial_page(t30_state_t *s)
{
    int i;
    int j;
    int k;
    int bit;

    span_log(&s->logging, SPAN_LOG_FLOW, "Commiting partial page - %d frames\n", s->ecm_frames);
    for (i = 0;  i < s->ecm_frames;  i++)
    {
        for (j = 0;  j < s->ecm_len[i];  j++)
        {
            for (k = 0;  k < 8;  k++)
            {
                bit = (s->ecm_data[i][j] >> k) & 1;
                if (t4_rx_put_bit(&(s->t4), bit))
                {
                    /* That is the end of the document */
                    /* Clear the buffer */
                    for (i = 0;  i < 256;  i++)
                        s->ecm_len[i] = -1;
                    s->ecm_frames = -1;
                    return -1;
                }
            }
        }
    }
    /* Clear the buffer */
    for (i = 0;  i < 256;  i++)
        s->ecm_len[i] = -1;
    s->ecm_frames = -1;
    return 0;
}
/*- End of function --------------------------------------------------------*/

static int send_next_ecm_frame(t30_state_t *s)
{
    int i;
    uint8_t frame[3];

    if (s->ecm_current_frame < s->ecm_frames)
    {
        /* Search for the next frame, within the current partial page, which has
           not been tagged as transferred OK. */
        for (i = s->ecm_current_frame;  i < s->ecm_frames;  i++)
        {
            if (s->ecm_len[i] >= 0)
            {
                send_frame(s, s->ecm_data[i], s->ecm_len[i]);
                s->ecm_current_frame = i + 1;
                return 0;
            }
        }
    }
    if (s->ecm_current_frame <= s->ecm_frames + 3)
    {
        /* We have sent all the FCD frames. Send some RCP frames. Three seems to be
           a popular number, to minimise the risk of a bit error stopping the receiving
           end from recognising the RCP. */
        s->ecm_current_frame++;
        /* The RCP frame is an odd man out, as its a simple 1 byte control
           frame, but is specified to not have the final bit set. */
        frame[0] = 0xFF;
        frame[1] = 0x03;
        frame[2] = (uint8_t) (T4_RCP | s->dis_received);
        send_frame(s, frame, 3);
        return 0;
    }
    return -1;
}
/*- End of function --------------------------------------------------------*/

static void print_frame(t30_state_t *s, const char *io, const uint8_t *fr, int frlen)
{
    span_log(&s->logging,
             SPAN_LOG_FLOW,
             "%s %s with%s final frame tag\n",
             io,
             t30_frametype(fr[2]),
             (fr[1] & 0x10)  ?  ""  :  "out");
    span_log_buf(&s->logging, SPAN_LOG_FLOW, io, fr, frlen);
}
/*- End of function --------------------------------------------------------*/

static void send_frame(t30_state_t *s, const uint8_t *fr, int frlen)
{
    print_frame(s, "Tx: ", fr, frlen);

    if (s->send_hdlc_handler)
        s->send_hdlc_handler(s->send_hdlc_user_data, fr, frlen);
}
/*- End of function --------------------------------------------------------*/

static void send_simple_frame(t30_state_t *s, int type)
{
    uint8_t frame[3];

    /* The simple command/response frames are always final frames */
    frame[0] = 0xFF;
    frame[1] = 0x13;
    frame[2] = (uint8_t) (type | s->dis_received);
    send_frame(s, frame, 3);
}
/*- End of function --------------------------------------------------------*/

static void send_20digit_msg_frame(t30_state_t *s, int cmd, char *msg)
{
    size_t len;
    int p;
    uint8_t frame[23];

    len = strlen(msg);
    p = 0;
    frame[p++] = 0xFF;
    frame[p++] = 0x03;
    frame[p++] = (uint8_t) (cmd | s->dis_received);
    while (len > 0)
        frame[p++] = msg[--len];
    while (p < 23)
        frame[p++] = ' ';
    send_frame(s, frame, 23);
}
/*- End of function --------------------------------------------------------*/

static int send_ident_frame(t30_state_t *s, uint8_t cmd)
{
    /* Only send if there is an ident to send. */
    if (s->local_ident[0])
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Sending ident '%s'\n", s->local_ident);
        /* 'cmd' should be T30_TSI, T30_CIG or T30_CSI */
        send_20digit_msg_frame(s, cmd, s->local_ident);
        return TRUE;
    }
    return FALSE;
}
/*- End of function --------------------------------------------------------*/

static int send_pw_frame(t30_state_t *s)
{
    /* Only send if there is a password to send. */
    if (s->local_password[0])
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Sending password '%s'\n", s->local_password);
        send_20digit_msg_frame(s, T30_PWD, s->local_password);
        return TRUE;
    }
    return FALSE;
}
/*- End of function --------------------------------------------------------*/

static int send_sub_frame(t30_state_t *s)
{
    /* Only send if there is a sub-address to send. */
    if (s->local_sub_address[0])
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Sending sub address '%s'\n", s->local_sub_address);
        send_20digit_msg_frame(s, T30_SUB, s->local_sub_address);
        return TRUE;
    }
    return FALSE;
}
/*- End of function --------------------------------------------------------*/

static int send_nsf_frame(t30_state_t *s)
{
    int p;
    uint8_t frame[100 + 3];

    /* Only send if there is an NSF message to send. */
    if (s->local_nsf_len)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Sending user supplied NSF - %d octets\n", s->local_nsf_len);
        p = 0;
        frame[p++] = 0xFF;
        frame[p++] = 0x03;
        frame[p++] = (uint8_t) (T30_NSF | s->dis_received);
        for (  ;  p < s->local_nsf_len + 3;  p++)
            frame[p] = s->local_nsf[p - 3];
        send_frame(s, frame, s->local_nsf_len + 3);
        return TRUE;
    }
    return FALSE;
}
/*- End of function --------------------------------------------------------*/

static int send_pps_frame(t30_state_t *s)
{
    uint8_t frame[100 + 3];
    
    frame[0] = 0xFF;
    frame[1] = 0x13;
    frame[2] = T30_PPS;
    frame[3] = (s->ecm_at_page_end)  ?  ((uint8_t) (s->next_tx_step | s->dis_received))  :  T30_NULL;
    frame[4] = s->ecm_page & 0xFF;
    frame[5] = s->ecm_block & 0xFF;
    frame[6] = s->ecm_frames - 1;
    span_log(&s->logging, SPAN_LOG_FLOW, "Sending PPS + %s\n", t30_frametype(frame[3]));
    send_frame(s, frame, 7);
    return frame[3] & 0xFE;
}
/*- End of function --------------------------------------------------------*/

static int set_dis_or_dtc(t30_state_t *s)
{
    /* Whether we use a DIS or a DTC is determined by whether we have received a DIS.
       We just need to edit the prebuilt message. */
    s->dis_dtc_frame[2] = (uint8_t) (T30_DIS | s->dis_received);
    /* If we have a file name to receive into, then we are receive capable */
    if (s->rx_file[0])
        s->dis_dtc_frame[4] |= DISBIT2;
    else
        s->dis_dtc_frame[4] &= ~DISBIT2;
    /* If we have a file name to transmit, then we are ready to transmit (polling) */
    if (s->tx_file[0])
        s->dis_dtc_frame[4] |= DISBIT1;
    else
        s->dis_dtc_frame[4] &= ~DISBIT1;
    t30_decode_dis_dtc_dcs(s, s->dis_dtc_frame, s->dis_dtc_len);
    return 0;
}
/*- End of function --------------------------------------------------------*/

static int build_dis_or_dtc(t30_state_t *s)
{
    int i;

    /* Build a skeleton for the DIS and DTC messages. This will be edited for
       the dynamically changing capabilities (e.g. can receive) just before
       it is sent. It might also be edited if the application changes our
       capabilities (e.g. disabling fine mode). Right now we set up all the
       unchanging stuff about what we are capable of doing. */
    s->dis_dtc_frame[0] = 0xFF;
    s->dis_dtc_frame[1] = 0x13;
    s->dis_dtc_frame[2] = (uint8_t) (T30_DIS | s->dis_received);
    s->dis_dtc_frame[3] = 0x00;
    s->dis_dtc_frame[4] = 0x00;
    for (i = 5;  i < 18;  i++)
        s->dis_dtc_frame[i] = DISBIT8;
    s->dis_dtc_frame[18] = 0x00;

    /* Always say 256 octets per ECM frame preferred, as 64 is never used in the
       real world. */
    if ((s->iaf & T30_IAF_MODE_T37))
        s->dis_dtc_frame[3] |= DISBIT1;
    if ((s->iaf & T30_IAF_MODE_T38))
        s->dis_dtc_frame[3] |= DISBIT3;
    /* No 3G mobile  */
    /* No V.8 */
    /* 256 octets preferred - don't bother making this optional, as everything uses 256 */
    /* Ready to transmit a fax (polling) will be determined separately, and this message edited. */
    /* Ready to receive a fax will be determined separately, and this message edited. */
    /* With no modems set we are actually selecting V.27ter fallback at 2400bps */
    if ((s->supported_modems & T30_SUPPORT_V27TER))
        s->dis_dtc_frame[4] |= DISBIT4;
    if ((s->supported_modems & T30_SUPPORT_V29))
        s->dis_dtc_frame[4] |= DISBIT3;
    /* V.17 is only valid when combined with V.29 and V.27ter, so if we enable V.17 we force the others too. */
    if ((s->supported_modems & T30_SUPPORT_V17))
        s->dis_dtc_frame[4] |= (DISBIT6 | DISBIT4 | DISBIT3);
    if ((s->supported_resolutions & T30_SUPPORT_FINE_RESOLUTION))
        s->dis_dtc_frame[4] |= DISBIT7;
    if ((s->supported_compressions & T30_SUPPORT_T4_2D_COMPRESSION))
        s->dis_dtc_frame[4] |= DISBIT8;
    /* 215mm wide is always supported */
    if ((s->supported_image_sizes & T30_SUPPORT_303MM_WIDTH))
        s->dis_dtc_frame[5] |= DISBIT2;
    else if ((s->supported_image_sizes & T30_SUPPORT_255MM_WIDTH))
        s->dis_dtc_frame[5] |= DISBIT1;
    /* A4 is always supported. */
    if ((s->supported_image_sizes & T30_SUPPORT_UNLIMITED_LENGTH))
        s->dis_dtc_frame[5] |= DISBIT4;
    else if ((s->supported_image_sizes & T30_SUPPORT_B4_LENGTH))
        s->dis_dtc_frame[5] |= DISBIT3;
    /* No scan-line padding required. */
    s->dis_dtc_frame[5] |= (DISBIT7 | DISBIT6 | DISBIT5);
    if ((s->supported_compressions & T30_SUPPORT_NO_COMPRESSION))
        s->dis_dtc_frame[6] |= DISBIT2;
    if (s->ecm_allowed)
        s->dis_dtc_frame[6] |= DISBIT3;
    if ((s->supported_compressions & T30_SUPPORT_T6_COMPRESSION))
        s->dis_dtc_frame[6] |= DISBIT7;
#if defined(SUPPORT_FNV)
    s->dis_dtc_frame[7] |= DISBIT1;
#endif
    if ((s->supported_polling_features & T30_SUPPORT_SEP))
        s->dis_dtc_frame[7] |= DISBIT3;
    if ((s->supported_polling_features & T30_SUPPORT_PSA))
        s->dis_dtc_frame[7] |= DISBIT4;
    if ((s->supported_compressions & T30_SUPPORT_T43_COMPRESSION))
        s->dis_dtc_frame[7] |= DISBIT4;
    /* No plane interleave */
    /* No G.726 */
    /* No extended voice coding */
    if ((s->supported_resolutions & T30_SUPPORT_SUPERFINE_RESOLUTION))
        s->dis_dtc_frame[8] |= DISBIT1;
    if ((s->supported_resolutions & T30_SUPPORT_300_300_RESOLUTION))
        s->dis_dtc_frame[8] |= DISBIT2;
    if ((s->supported_resolutions & (T30_SUPPORT_400_400_RESOLUTION | T30_SUPPORT_R16_RESOLUTION)))
        s->dis_dtc_frame[8] |= DISBIT3;
    /* Metric */ 
    s->dis_dtc_frame[8] |= DISBIT4;
    /* No sub-addressing */
    /* No password */
    /* No data file (polling) */
    /* No BFT */
    /* No DTM */
    /* No EDI */
    /* No BTM */
    /* No mixed mode (polling) */
    /* No character mode */
    /* No mixed mode */
    /* No mode 26 */
    /* No digital network capable */
    /* No JPEG */
    /* No full colour */
    /* No 12bits/pel */
    /* No sub-sampling */
    if ((s->supported_image_sizes & T30_SUPPORT_US_LETTER_LENGTH))
        s->dis_dtc_frame[12] |= DISBIT4;
    if ((s->supported_image_sizes & T30_SUPPORT_US_LEGAL_LENGTH))
        s->dis_dtc_frame[12] |= DISBIT5;
    if ((s->supported_compressions & T30_SUPPORT_T85_COMPRESSION))
        s->dis_dtc_frame[12] |= DISBIT6;
    /* No T.85 optional. */
    if ((s->supported_resolutions & T30_SUPPORT_600_600_RESOLUTION))
        s->dis_dtc_frame[15] |= DISBIT1;
    if ((s->supported_resolutions & T30_SUPPORT_1200_1200_RESOLUTION))
        s->dis_dtc_frame[15] |= DISBIT2;
    if ((s->supported_resolutions & T30_SUPPORT_300_600_RESOLUTION))
        s->dis_dtc_frame[15] |= DISBIT3;
    if ((s->supported_resolutions & T30_SUPPORT_400_800_RESOLUTION))
        s->dis_dtc_frame[15] |= DISBIT4;
    if ((s->supported_resolutions & T30_SUPPORT_600_1200_RESOLUTION))
        s->dis_dtc_frame[15] |= DISBIT5;
    if ((s->supported_compressions & T30_SUPPORT_T45_COMPRESSION))
        s->dis_dtc_frame[16] |= DISBIT4;
    if ((s->iaf & T30_IAF_MODE_FLOW_CONTROL))
        s->dis_dtc_frame[18] |= DISBIT1;
    if ((s->iaf & T30_IAF_MODE_CONTINUOUS_FLOW))
        s->dis_dtc_frame[18] |= DISBIT3;
    s->dis_dtc_len = 19;
    t30_decode_dis_dtc_dcs(s, s->dis_dtc_frame, s->dis_dtc_len);
    return 0;
}
/*- End of function --------------------------------------------------------*/

static int build_dcs(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Translation between the codes for the minimum scan times the other end needs,
       and the codes for what we say will be used. We need 0 minimum. */
    static const uint8_t translate_min_scan_time[3][8] =
    {
     /* 20  5 10 20 40 40 10  0ms */ 
        {0, 1, 2, 0, 4, 4, 2, 7}, /* normal */
        {0, 1, 2, 2, 4, 0, 1, 7}, /* fine */
        {2, 1, 1, 1, 0, 2, 1, 7}  /* superfine, when half fine time is selected */
    };
    /* Translation between the codes for the minimum scan time we will use, and milliseconds. */
    static const int min_scan_times[8] =
    {
        20, 5, 10, 0, 40, 0, 0, 0
    };
    uint8_t dis_dtc_frame[T30_MAX_DIS_DTC_DCS_LEN];
    uint8_t min_bits_field;
    int i;
    
    if (len < 6)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Short DIS/DTC frame\n");
        return -1;
    }

    /* Make a local copy of the message, padded to the maximum possible length with zeros. This allows
       us to simply pick out the bits, without worrying about whether they were set from the remote side. */
    if (len > T30_MAX_DIS_DTC_DCS_LEN)
    {
        memcpy(dis_dtc_frame, msg, T30_MAX_DIS_DTC_DCS_LEN);
    }
    else
    {
        memcpy(dis_dtc_frame, msg, len);
        if (len < T30_MAX_DIS_DTC_DCS_LEN)
            memset(dis_dtc_frame + len, 0, T30_MAX_DIS_DTC_DCS_LEN - len);
    }
    
    /* Make a DCS frame based on local issues and a received DIS frame. Negotiate the result
       based on what both parties can do. */
    s->dcs_frame[0] = 0xFF;
    s->dcs_frame[1] = 0x13;
    s->dcs_frame[2] = (uint8_t) (T30_DCS | s->dis_received);
    s->dcs_frame[3] = 0x00;
    s->dcs_frame[4] = 0x00;
    for (i = 5;  i < 18;  i++)
        s->dcs_frame[i] = DISBIT8;
    s->dcs_frame[18] = 0x00;
    /* Set to required modem rate; standard resolution */
    s->dcs_frame[4] |= fallback_sequence[s->current_fallback].dcs_code;

    if ((s->iaf & T30_IAF_MODE_NO_FILL_BITS))
        min_bits_field = 7;
    else
        min_bits_field = (dis_dtc_frame[5] >> 4) & 7;
    /* Select the compression to use. */
    switch(s->line_encoding)
    {
    case T4_COMPRESSION_ITU_T6:
        s->dcs_frame[6] |= DISBIT7;
        break;
    case T4_COMPRESSION_ITU_T4_2D:
        s->dcs_frame[4] |= DISBIT8;
        break;
    default:
        break;
    }
    /* If we have a file to send, tell the far end to go into receive mode. */
    if (s->tx_file[0])
        s->dcs_frame[4] |= DISBIT2;
    /* Set the minimum scan time bits */
    switch (s->y_resolution)
    {
    case T4_Y_RESOLUTION_SUPERFINE:
        if ((dis_dtc_frame[8] & DISBIT1))
        {
            s->dcs_frame[8] |= DISBIT1;
            if ((dis_dtc_frame[8] & DISBIT6))
                min_bits_field = translate_min_scan_time[2][min_bits_field];
            else
                min_bits_field = translate_min_scan_time[1][min_bits_field];
            break;
        }
        /* Fall back */
        s->y_resolution = T4_Y_RESOLUTION_FINE;
        span_log(&s->logging, SPAN_LOG_FLOW, "Remote FAX does not support super-fine resolution.\n");
        /* Fall through */
    case T4_Y_RESOLUTION_FINE:
        if ((dis_dtc_frame[4] & DISBIT7))
        {
            s->dcs_frame[4] |= DISBIT7;
            min_bits_field = translate_min_scan_time[1][min_bits_field];
            break;
        }
        /* Fall back */
        s->y_resolution = T4_Y_RESOLUTION_STANDARD;
        span_log(&s->logging, SPAN_LOG_FLOW, "Remote FAX does not support fine resolution.\n");
        /* Fall through */
    default:
    case T4_Y_RESOLUTION_STANDARD:
        min_bits_field = translate_min_scan_time[0][min_bits_field];
        break;
    }
    if (min_scan_times[min_bits_field] == 0)
        s->min_row_bits = 0;
    else
        s->min_row_bits = fallback_sequence[s->current_fallback].bit_rate*min_scan_times[min_bits_field]/1000;
    s->dcs_frame[5] |= min_bits_field << 4;
    span_log(&s->logging, SPAN_LOG_FLOW, "Minimum bits per row will be %d\n", s->min_row_bits);
    switch (s->image_width)
    {
        /* Low (R4) res widths are not supported in recent versions of T.30 */
        /* Medium (R8) res widths */
    case 1728:
        break;
    case 2048:
        if ((s->dis_dtc_frame[5] & (DISBIT2 | DISBIT1)) < 1)
            return -1;
        s->dcs_frame[5] |= DISBIT1;
        break;
    case 2432:
        if ((s->dis_dtc_frame[5] & (DISBIT2 | DISBIT1)) < 2)
            return -1;
        s->dcs_frame[5] |= DISBIT2;
        break;
        /* High (R16) res widths */
    case 3456:
        if ((dis_dtc_frame[8] & DISBIT3) == 0)
            return -1;
        s->dcs_frame[8] |= DISBIT3;
        break;
    case 4096:
        if ((dis_dtc_frame[8] & DISBIT3) == 0  ||  (s->dis_dtc_frame[5] & (DISBIT2 | DISBIT1)) == 0)
            return -1;
        s->dcs_frame[5] |= DISBIT1;
        s->dcs_frame[8] |= DISBIT3;
        break;
    case 4864:
        if ((dis_dtc_frame[8] & DISBIT3) == 0  ||  (s->dis_dtc_frame[5] & (DISBIT2 | DISBIT1)) != DISBIT2)
            return -1;
        s->dcs_frame[5] |= DISBIT2;
        s->dcs_frame[8] |= DISBIT3;
        break;
    default:
        /* The image is of an unrecognised width. */
        return -1;
    }
    if (s->error_correcting_mode)
        s->dcs_frame[6] |= DISBIT3;
    s->dcs_len = 19;
    t30_decode_dis_dtc_dcs(s, s->dcs_frame, s->dcs_len);
    return 0;
}
/*- End of function --------------------------------------------------------*/

static int check_rx_dis_dtc(t30_state_t *s, const uint8_t *msg, int len)
{
    uint8_t dis_dtc_frame[T30_MAX_DIS_DTC_DCS_LEN];
    
    if (len < 6)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Short DIS/DTC frame\n");
        return -1;
    }

    /* Make a local copy of the message, padded to the maximum possible length with zeros. This allows
       us to simply pick out the bits, without worrying about whether they were set from the remote side. */
    if (len > T30_MAX_DIS_DTC_DCS_LEN)
    {
        memcpy(dis_dtc_frame, msg, T30_MAX_DIS_DTC_DCS_LEN);
    }
    else
    {
        memcpy(dis_dtc_frame, msg, len);
        if (len < T30_MAX_DIS_DTC_DCS_LEN)
            memset(dis_dtc_frame + len, 0, T30_MAX_DIS_DTC_DCS_LEN - len);
    }
    s->error_correcting_mode = (s->ecm_allowed  &&  (dis_dtc_frame[6] & DISBIT3) != 0);
    /* 256 octets per ECM frame */
    s->octets_per_ecm_frame = 256;
    /* Select the compression to use. */
    if ((s->supported_compressions & T30_SUPPORT_T6_COMPRESSION)  &&  (dis_dtc_frame[6] & DISBIT7))
    {
        s->line_encoding = T4_COMPRESSION_ITU_T6;
    }
    else if ((s->supported_compressions & T30_SUPPORT_T4_2D_COMPRESSION)  &&  (dis_dtc_frame[4] & DISBIT8))
    {
        s->line_encoding = T4_COMPRESSION_ITU_T4_2D;
    }
    else
    {
        s->line_encoding = T4_COMPRESSION_ITU_T4_1D;
    }
    span_log(&s->logging, SPAN_LOG_FLOW, "Selected compression %d\n", s->line_encoding);
    switch (dis_dtc_frame[4] & (DISBIT6 | DISBIT5 | DISBIT4 | DISBIT3))
    {
    case 0:
        s->current_fallback = T30_V27TER_FALLBACK_START + 1;
        break;
    case DISBIT4:
        s->current_fallback = T30_V27TER_FALLBACK_START;
        break;
    case DISBIT3:
        /* TODO: this doesn't allow for skipping the V.27ter modes */
        s->current_fallback = T30_V29_FALLBACK_START;
        break;
    case (DISBIT4 | DISBIT3):
        s->current_fallback = T30_V29_FALLBACK_START;
        break;
    case (DISBIT6 | DISBIT4 | DISBIT3):
        if ((s->supported_modems & T30_SUPPORT_V17))
            s->current_fallback = T30_V17_FALLBACK_START;
        else
            s->current_fallback = T30_V29_FALLBACK_START;
        break;
    default:
        span_log(&s->logging, SPAN_LOG_FLOW, "Remote does not support a compatible modem\n");
        /* We cannot talk to this machine! */
        return -1;
    }
    return 0;
}
/*- End of function --------------------------------------------------------*/

static int check_rx_dcs(t30_state_t *s, const uint8_t *msg, int len)
{
    static const int widths[3][4] =
    {
        { 864, 1024, 1216, -1}, /* R4 resolution - no longer used in recent versions of T.30 */
        {1728, 2048, 2432, -1}, /* R8 resolution */
        {3456, 4096, 4864, -1}  /* R16 resolution */
    };
    uint8_t dcs_frame[T30_MAX_DIS_DTC_DCS_LEN];
    int speed;
    int i;

    t30_decode_dis_dtc_dcs(s, msg, len);

    /* Check DCS frame from remote */
    if (len < 6)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Short DCS frame\n");
        return -1;
    }

    /* Make a local copy of the message, padded to the maximum possible length with zeros. This allows
       us to simply pick out the bits, without worrying about whether they were set from the remote side. */
    if (len > T30_MAX_DIS_DTC_DCS_LEN)
    {
        memcpy(dcs_frame, msg, T30_MAX_DIS_DTC_DCS_LEN);
    }
    else
    {
        memcpy(dcs_frame, msg, len);
        if (len < T30_MAX_DIS_DTC_DCS_LEN)
            memset(dcs_frame + len, 0, T30_MAX_DIS_DTC_DCS_LEN - len);
    }

    s->octets_per_ecm_frame = (dcs_frame[6] & DISBIT4)  ?  256  :  64;
    if ((dcs_frame[8] & DISBIT1))
        s->y_resolution = T4_Y_RESOLUTION_SUPERFINE;
    else if (dcs_frame[4] & DISBIT7)
        s->y_resolution = T4_Y_RESOLUTION_FINE;
    else
        s->y_resolution = T4_Y_RESOLUTION_STANDARD;
    s->image_width = widths[(dcs_frame[8] & DISBIT3)  ?  2  :  1][dcs_frame[5] & (DISBIT2 | DISBIT1)];

    /* Check which compression we will use. */
    if ((dcs_frame[6] & DISBIT7))
        s->line_encoding = T4_COMPRESSION_ITU_T6;
    else if ((dcs_frame[4] & DISBIT8))
        s->line_encoding = T4_COMPRESSION_ITU_T4_2D;
    else
        s->line_encoding = T4_COMPRESSION_ITU_T4_1D;
    span_log(&s->logging, SPAN_LOG_FLOW, "Selected compression %d\n", s->line_encoding);
    if (!(dcs_frame[4] & DISBIT2))
        span_log(&s->logging, SPAN_LOG_FLOW, "Remote cannot receive\n");

    speed = dcs_frame[4] & (DISBIT6 | DISBIT5 | DISBIT4 | DISBIT3);
    for (i = 0;  fallback_sequence[i].bit_rate;  i++)
    {
        if (fallback_sequence[i].dcs_code == speed)
            break;
    }
    if (fallback_sequence[i].bit_rate == 0)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Remote asked for a modem standard we do not support\n");
        return -1;
    }
    s->current_fallback = i;
    s->error_correcting_mode = ((dcs_frame[6] & DISBIT3) != 0);
    return 0;
}
/*- End of function --------------------------------------------------------*/

static void send_dcn(t30_state_t *s)
{
    queue_phase(s, T30_PHASE_D_TX);
    set_state(s, T30_STATE_C);
    send_simple_frame(s, T30_DCN);
}
/*- End of function --------------------------------------------------------*/

static void send_dis_or_dtc_sequence(t30_state_t *s)
{
    if (send_nsf_frame(s))
    {
        s->step = 0;
        return;
    }
    if (send_ident_frame(s, T30_CSI))
    {
        s->step = 1;
        return;
    }
    set_dis_or_dtc(s);
    send_frame(s, s->dis_dtc_frame, s->dis_dtc_len);
    s->step = 2;
}
/*- End of function --------------------------------------------------------*/

static void send_dcs_sequence(t30_state_t *s)
{
    if (send_pw_frame(s))
    {
        s->step = 0;
        return;
    }
    if (send_sub_frame(s))
    {
        s->step = 1;
        return;
    }
    if (send_ident_frame(s, T30_TSI))
    {
        s->step = 2;
        return;
    }
    send_frame(s, s->dcs_frame, s->dcs_len);
    s->step = 3;
}
/*- End of function --------------------------------------------------------*/

static void disconnect(t30_state_t *s)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "Disconnecting\n");
    /* Make sure any FAX in progress is tidied up. If the tidying up has
       already happened, repeating it here is harmless. */
    t4_rx_end(&(s->t4));
    t4_tx_end(&(s->t4));
    s->timer_t0_t1 = 0;
    s->timer_t2_t4 = 0;
    s->timer_t3 = 0;
    s->timer_t5 = 0;
    set_phase(s, T30_PHASE_E);
    set_state(s, T30_STATE_B);
}
/*- End of function --------------------------------------------------------*/

static int start_sending_document(t30_state_t *s)
{
    if (s->tx_file[0] == '\0')
    {
        /* There is nothing to send */
        span_log(&s->logging, SPAN_LOG_FLOW, "No document to send\n");
        return  FALSE;
    }
    span_log(&s->logging, SPAN_LOG_FLOW, "Start sending document\n");
    if (t4_tx_init(&(s->t4), s->tx_file, s->tx_start_page, s->tx_stop_page))
    {
        span_log(&s->logging, SPAN_LOG_WARNING, "Cannot open source TIFF file '%s'\n", s->tx_file);
        s->current_status = T30_ERR_FILEERROR;
        return  FALSE;
    }
    t4_tx_set_tx_encoding(&(s->t4), s->line_encoding);
    t4_tx_set_min_row_bits(&(s->t4), s->min_row_bits);
    t4_tx_set_local_ident(&(s->t4), s->local_ident);
    t4_tx_set_header_info(&(s->t4), s->header_info);

    s->y_resolution = t4_tx_get_y_resolution(&(s->t4));
    switch (s->y_resolution)
    {
    case T4_Y_RESOLUTION_STANDARD:
        s->dcs_frame[4] &= ~DISBIT7;
        s->dcs_frame[8] &= ~DISBIT1;
        break;
    case T4_Y_RESOLUTION_FINE:
        s->dcs_frame[4] |= DISBIT7;
        s->dcs_frame[8] &= ~DISBIT1;
        break;
    case T4_Y_RESOLUTION_SUPERFINE:
        s->dcs_frame[4] &= ~DISBIT7;
        s->dcs_frame[8] |= DISBIT1;
        break;
    }
    s->image_width = t4_tx_get_image_width(&(s->t4));
    t4_tx_start_page(&(s->t4));
    s->ecm_page = 0;
    s->ecm_block = 0;
    if (s->error_correcting_mode)
    {
        if (get_partial_ecm_page(s) == 0)
            span_log(&s->logging, SPAN_LOG_WARNING, "No image data to send\n");
    }
    /* Schedule training after the messages */
    set_state(s, T30_STATE_D);
    s->retries = 0;
    send_dcs_sequence(s);
    return  TRUE;
}
/*- End of function --------------------------------------------------------*/

static int restart_sending_document(t30_state_t *s)
{
    /* Schedule training after the messages */
    t4_tx_restart_page(&(s->t4));
    set_state(s, T30_STATE_D);
    s->retries = 0;
    s->ecm_block = 0;
    send_dis_or_dtc_sequence(s);
    return  TRUE;
}
/*- End of function --------------------------------------------------------*/

static int start_receiving_document(t30_state_t *s)
{
    if (s->rx_file[0] == '\0')
    {
        /* There is nothing to receive to */
        span_log(&s->logging, SPAN_LOG_FLOW, "No document to receive\n");
        return  FALSE;
    }
    span_log(&s->logging, SPAN_LOG_FLOW, "Start receiving document\n");
    queue_phase(s, T30_PHASE_B_TX);
    set_state(s, T30_STATE_R);
    s->dis_received = FALSE;
    s->ecm_page = 0;
    s->ecm_block = 0;
    send_dis_or_dtc_sequence(s);
    return  TRUE;
}
/*- End of function --------------------------------------------------------*/

static void unexpected_frame(t30_state_t *s, const uint8_t *msg, int len)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "Unexpected %s received in state %d\n", t30_frametype(msg[2]), s->state);
    if (s->state == T30_STATE_F_DOC)
        s->current_status = T30_ERR_INVALCMDRX;
}
/*- End of function --------------------------------------------------------*/

static void unexpected_final_frame(t30_state_t *s, const uint8_t *msg, int len)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "Unexpected %s received in state %d\n", t30_frametype(msg[2]), s->state);
    s->current_status = T30_ERR_UNEXPECTED;
    send_dcn(s);
}
/*- End of function --------------------------------------------------------*/

static void unexpected_frame_length(t30_state_t *s, const uint8_t *msg, int len)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "Unexpected %s frame length - %d\n", t30_frametype(msg[0]), len);
    s->current_status = T30_ERR_UNEXPECTED;
    send_dcn(s);
}
/*- End of function --------------------------------------------------------*/

static void process_rx_dis_or_dtc(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Digital identification signal or digital transmit command */
    s->dis_received = TRUE;
    check_rx_dis_dtc(s, msg, len);
    switch (s->state)
    {
    case T30_STATE_D_POST_TCF:
        /* It appears they didn't see what we sent - retry the TCF */
        if (++s->retries > MAX_MESSAGE_TRIES)
        {
            s->current_status = T30_ERR_RETRYDCN;
            send_dcn(s);
            break;
        }
        /* TODO: We should fall through at this point. However, if we do that
           we need to allow for a send or receive already being in progress from
           a previous try */
        queue_phase(s, T30_PHASE_B_TX);
        /* Schedule training after the messages */
        set_state(s, T30_STATE_D);
        send_dcs_sequence(s);
        break;
    case T30_STATE_R:
    case T30_STATE_T:
    case T30_STATE_F_DOC:
        t30_decode_dis_dtc_dcs(s, msg, len);
        if (s->phase_b_handler)
            s->phase_b_handler(s, s->phase_d_user_data, msg[2]);
        queue_phase(s, T30_PHASE_B_TX);
        /* Try to send something */
        if (s->tx_file[0])
        {
            span_log(&s->logging, SPAN_LOG_FLOW, "Trying to send file '%s'\n", s->tx_file);
            if ((msg[4] & DISBIT2))
            {
                if (!start_sending_document(s))
                {
                    send_dcn(s);
                    break;
                }
                if (build_dcs(s, msg, len))
                {
                    span_log(&s->logging, SPAN_LOG_FLOW, "The remote machine is incompatible\n", s->tx_file);
                    s->current_status = T30_ERR_INCOMPATIBLE;
                    send_dcn(s);
                    break;
                }
            }
            else
            {
                span_log(&s->logging, SPAN_LOG_FLOW, "%s far end cannot receive\n", t30_frametype(msg[2]));
                s->current_status = T30_ERR_NOTRXCAPABLE;
                send_dcn(s);
            }
            break;
        }
        span_log(&s->logging, SPAN_LOG_FLOW, "%s nothing to send\n", t30_frametype(msg[2]));
        /* ... then try to receive something */
        if (s->rx_file[0])
        {
            span_log(&s->logging, SPAN_LOG_FLOW, "Trying to receive file '%s'\n", s->rx_file);
            if ((msg[4] & DISBIT1))
            {
                if (!start_receiving_document(s))
                {
                    send_dcn(s);
                    break;
                }
                if (set_dis_or_dtc(s))
                {
                    s->current_status = T30_ERR_INCOMPATIBLE;
                    send_dcn(s);
                    break;
                }
            }
            else
            {
                span_log(&s->logging, SPAN_LOG_FLOW, "%s far end cannot transmit\n", t30_frametype(msg[2]));
                s->current_status = T30_ERR_NOTTXCAPABLE;
                send_dcn(s);
            }
            break;
        }
        span_log(&s->logging, SPAN_LOG_FLOW, "%s nothing to receive\n", t30_frametype(msg[2]));
        /* There is nothing to do, or nothing we are able to do. */
        send_dcn(s);
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_dcs(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Digital command signal */
    switch (s->state)
    {
    case T30_STATE_R:
    case T30_STATE_F_DOC:
        /* (TSI) DCS */
        /* (PWD) (SUB) (TSI) DCS */
        check_rx_dcs(s, msg, len);
        if (s->phase_b_handler)
            s->phase_b_handler(s, s->phase_d_user_data, T30_DCS);
        /* Start document reception */
        span_log(&s->logging,
                SPAN_LOG_FLOW, 
                "Get document at %dbps, modem %d\n",
                fallback_sequence[s->current_fallback].bit_rate,
                fallback_sequence[s->current_fallback].modem_type);
        if (s->rx_file[0] == '\0')
        {
            span_log(&s->logging, SPAN_LOG_FLOW, "No document to receive\n");
            s->current_status = T30_ERR_FILEERROR;
            send_dcn(s);
            break;
        }
        if (!s->in_message  &&  t4_rx_init(&(s->t4), s->rx_file, T4_COMPRESSION_ITU_T4_2D))
        {
            span_log(&s->logging, SPAN_LOG_WARNING, "Cannot open target TIFF file '%s'\n", s->rx_file);
            s->current_status = T30_ERR_FILEERROR;
            send_dcn(s);
            break;
        }
        if (!(s->iaf & T30_IAF_MODE_NO_TCF))
        {
            set_state(s, T30_STATE_F_TCF);
            set_phase(s, T30_PHASE_C_NON_ECM_RX);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_cfr(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Confirmation to receive */
    switch (s->state)
    {
    case T30_STATE_D_POST_TCF:
        /* Trainability test succeeded. Send the document. */
        span_log(&s->logging, SPAN_LOG_FLOW, "Trainability test succeeded\n");
        s->retries = 0;
        s->short_train = TRUE;
        if (s->error_correcting_mode)
        {
            set_state(s, T30_STATE_IV);
            queue_phase(s, T30_PHASE_C_ECM_TX);
            s->ecm_current_frame = 0;
            send_next_ecm_frame(s);
        }
        else
        {
            set_state(s, T30_STATE_I);
            queue_phase(s, T30_PHASE_C_NON_ECM_TX);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_ftt(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Failure to train */
    switch (s->state)
    {
    case T30_STATE_D_POST_TCF:
        /* Trainability test failed. Try again. */
        span_log(&s->logging, SPAN_LOG_FLOW, "Trainability test failed\n");
        s->retries = 0;
        s->short_train = FALSE;
        if (fallback_sequence[++s->current_fallback].bit_rate == 0)
        {
            /* We have fallen back as far as we can go. Give up. */
            s->current_fallback = 0;
            s->current_status = T30_ERR_CANNOTTRAIN;
            send_dcn(s);
            break;
        }
        /* Schedule training after the messages */
        set_state(s, T30_STATE_D);
        s->retries = 0;
        send_dcs_sequence(s);
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_eom(t30_state_t *s, const uint8_t *msg, int len)
{
    /* End of message */
    switch (s->state)
    {
    case T30_STATE_F_POST_DOC_NON_ECM:
        if (s->phase_d_handler)
            s->phase_d_handler(s, s->phase_d_user_data, T30_EOM);
        s->next_rx_step = T30_EOM;
        /* Return to phase B */
        queue_phase(s, T30_PHASE_B_TX);
        switch (copy_quality(s))
        {
        case T30_COPY_QUALITY_GOOD:
            t4_rx_end_page(&(s->t4));
            rx_start_page(s);
            set_state(s, T30_STATE_III_Q_MCF);
            send_simple_frame(s, T30_MCF);
            break;
        case T30_COPY_QUALITY_POOR:
            t4_rx_end_page(&(s->t4));
            rx_start_page(s);
            set_state(s, T30_STATE_III_Q_RTP);
            send_simple_frame(s, T30_RTP);
            break;
        case T30_COPY_QUALITY_BAD:
            rx_start_page(s);
            set_state(s, T30_STATE_III_Q_RTN);
            send_simple_frame(s, T30_RTN);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_mps(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Multi-page signal */
    switch (s->state)
    {
    case T30_STATE_F_POST_DOC_NON_ECM:
        if (s->phase_d_handler)
            s->phase_d_handler(s, s->phase_d_user_data, T30_MPS);
        s->next_rx_step = T30_MPS;
        /* Return to phase C */
        queue_phase(s, T30_PHASE_D_TX);
        switch (copy_quality(s))
        {
        case T30_COPY_QUALITY_GOOD:
            t4_rx_end_page(&(s->t4));
            rx_start_page(s);
            set_state(s, T30_STATE_III_Q_MCF);
            send_simple_frame(s, T30_MCF);
            break;
        case T30_COPY_QUALITY_POOR:
            t4_rx_end_page(&(s->t4));
            rx_start_page(s);
            set_state(s, T30_STATE_III_Q_RTP);
            send_simple_frame(s, T30_RTP);
            break;
        case T30_COPY_QUALITY_BAD:
            rx_start_page(s);
            set_state(s, T30_STATE_III_Q_RTN);
            send_simple_frame(s, T30_RTN);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_eop(t30_state_t *s, const uint8_t *msg, int len)
{
    /* End of procedure */
    switch (s->state)
    {
    case T30_STATE_F_POST_DOC_NON_ECM:
        if (s->phase_d_handler)
            s->phase_d_handler(s, s->phase_d_user_data, T30_EOP);
        s->next_rx_step = T30_EOP;
        queue_phase(s, T30_PHASE_D_TX);
        switch (copy_quality(s))
        {
        case T30_COPY_QUALITY_GOOD:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_MCF);
            send_simple_frame(s, T30_MCF);
            break;
        case T30_COPY_QUALITY_POOR:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_RTP);
            send_simple_frame(s, T30_RTP);
            break;
        case T30_COPY_QUALITY_BAD:
            set_state(s, T30_STATE_III_Q_RTN);
            send_simple_frame(s, T30_RTN);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_pri_eom(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Procedure interrupt - end of procedure */
    switch (s->state)
    {
    case T30_STATE_F_POST_DOC_NON_ECM:
        if (s->phase_d_handler)
        {
            s->phase_d_handler(s, s->phase_d_user_data, T30_PRI_EOM);
            s->timer_t3 = ms_to_samples(DEFAULT_TIMER_T3);
        }
        s->next_rx_step = T30_PRI_EOM;
        switch (copy_quality(s))
        {
        case T30_COPY_QUALITY_GOOD:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_MCF);
            break;
        case T30_COPY_QUALITY_POOR:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_RTP);
            break;
        case T30_COPY_QUALITY_BAD:
            set_state(s, T30_STATE_III_Q_RTN);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_pri_mps(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Procedure interrupt - multipage signal */
    switch (s->state)
    {
    case T30_STATE_F_POST_DOC_NON_ECM:
        if (s->phase_d_handler)
        {
            s->phase_d_handler(s, s->phase_d_user_data, T30_PRI_MPS);
            s->timer_t3 = ms_to_samples(DEFAULT_TIMER_T3);
        }
        s->next_rx_step = T30_PRI_MPS;
        switch (copy_quality(s))
        {
        case T30_COPY_QUALITY_GOOD:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_MCF);
            break;
        case T30_COPY_QUALITY_POOR:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_RTP);
            break;
        case T30_COPY_QUALITY_BAD:
            set_state(s, T30_STATE_III_Q_RTN);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_pri_eop(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Procedure interrupt - end of procedure */
    switch (s->state)
    {
    case T30_STATE_F_POST_DOC_NON_ECM:
        if (s->phase_d_handler)
        {
            s->phase_d_handler(s, s->phase_d_user_data, T30_PRI_EOP);
            s->timer_t3 = ms_to_samples(DEFAULT_TIMER_T3);
        }
        s->next_rx_step = T30_PRI_EOP;
        switch (copy_quality(s))
        {
        case T30_COPY_QUALITY_GOOD:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_MCF);
            break;
        case T30_COPY_QUALITY_POOR:
            t4_rx_end_page(&(s->t4));
            t4_rx_end(&(s->t4));
            s->in_message = FALSE;
            set_state(s, T30_STATE_III_Q_RTP);
            break;
        case T30_COPY_QUALITY_BAD:
            set_state(s, T30_STATE_III_Q_RTN);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_nss(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Non-standard facilities set-up */
    switch (s->state)
    {
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_ctc(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Continue to correct */
    switch (s->state)
    {
    case T30_STATE_F_DOC:
    case T30_STATE_F_POST_DOC_ECM:
        send_simple_frame(s, T30_CTR);
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_ctr(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Response for continue to correct */
    switch (s->state)
    {
    case T30_STATE_IV_CTC:
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_err(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Response for end of retransmission */
    switch (s->state)
    {
    case T30_STATE_IV_EOR:
    case T30_STATE_IV_EOR_RNR:
        /* TODO: Continue with the next message if MPS or EOM? */
        send_dcn(s);
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_ppr(t30_state_t *s, const uint8_t *msg, int len)
{
    int i;
    int j;
    int frame_no;
    int mask;
    uint8_t frame[100 + 3];
    
    /* Partial page request */
    switch (s->state)
    {
    case T30_STATE_IV_PPS_NULL:
    case T30_STATE_IV_PPS_Q:
        if (++s->ppr_count >= 4)
        {
            /* Continue to correct? */
            /* TODO: Decide if we should continue */
            if (1)
            {
                set_state(s, T30_STATE_IV_CTC);
                send_simple_frame(s, T30_CTC);
            }
            else
            {
                set_state(s, T30_STATE_IV_EOR);
                frame[0] = 0xFF;
                frame[1] = 0x13;
                frame[2] = T30_EOR;
                frame[3] = (s->ecm_at_page_end)  ?  ((uint8_t) (s->next_tx_step | s->dis_received))  :  T30_NULL;
                span_log(&s->logging, SPAN_LOG_FLOW, "Sending EOR + %s\n", t30_frametype(frame[3]));
                send_frame(s, frame, 4);
            }
        }
        else
        {
            /* Check which frames are OK, and mark them as OK. */
            for (i = 0;  i < 32;  i++)
            {
                if (msg[i + 3] == 0)
                {
                    s->ecm_frame_map[i + 3] = 0;
                    for (j = 0;  j < 8;  j++)
                        s->ecm_len[(i << 3) + j] = -1;
                }
                else
                {
                    mask = 1;
                    for (j = 0;  j < 8;  j++)
                    {
                        frame_no = (i << 3) + j;
                        /* Tick off the frames they are not complaining about as OK */
                        if ((msg[i + 3] & mask) == 0)
                            s->ecm_len[frame_no] = -1;
                        else
                        {
                            if (frame_no < s->ecm_frames)
                                span_log(&s->logging, SPAN_LOG_FLOW, "Frame %d to be resent\n", frame_no);
#if 0
                            /* Diagnostic: See if the other end is complaining about something we didn't even send this time. */
                            if (s->ecm_len[frame_no] < 0)
                                span_log(&s->logging, SPAN_LOG_FLOW, "PPR contains complaint about frame %d, which was not send\n", frame_no);
#endif
                        }
                        mask <<= 1;
                    }
                }
            }
            /* Initiate resending of the remainder of the frames. */
            set_state(s, T30_STATE_IV);
            queue_phase(s, T30_PHASE_C_ECM_TX);
            s->ecm_current_frame = 0;
            send_next_ecm_frame(s);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_rr(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Receiver ready */
    switch (s->state)
    {
    case T30_STATE_F_POST_DOC_NON_ECM:
        /* TODO: */
        s->timer_t5 = 0;
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_rnr(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Receive not ready */
    switch (s->state)
    {
    case T30_STATE_IV_PPS_NULL:
    case T30_STATE_IV_PPS_Q:
        set_state(s, T30_STATE_IV_PPS_RNR);
        send_simple_frame(s, T30_RR);
        break;
    case T30_STATE_IV_PPS_RNR:
        send_simple_frame(s, T30_RR);
        /* TODO: */
        if (s->timer_t5 == 0)
            s->timer_t5 = ms_to_samples(DEFAULT_TIMER_T5);
        break;
    case T30_STATE_IV_EOR:
        set_state(s, T30_STATE_IV_EOR_RNR);
        send_simple_frame(s, T30_RR);
        break;
    case T30_STATE_IV_EOR_RNR:
        send_simple_frame(s, T30_RR);
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_eos(t30_state_t *s, const uint8_t *msg, int len)
{
    /* End of selection */
    switch (s->state)
    {
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_tr(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Transmit ready */
    switch (s->state)
    {
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_fcd(t30_state_t *s, const uint8_t *msg, int len)
{
    int frame_no;
    int i;

    /* Facsimile coded data */
    switch (s->state)
    {
    case T30_STATE_F_DOC:
        if (len <= 4 + 256)
        {
            frame_no = msg[3];
            /* Just store the actual image data, and record its length */
            span_log(&s->logging, SPAN_LOG_FLOW, "Storing image frame %d, length %d\n", frame_no, len - 4);
            for (i = 0;  i < len - 4;  i++)
                s->ecm_data[frame_no][i] = msg[i + 4];
            s->ecm_len[frame_no] = len - 4;
            span_log(&s->logging, SPAN_LOG_FLOW, "Storing ECM frame %d\n", frame_no);
        }
        else
        {
            unexpected_frame_length(s, msg, len);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_rcp(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Return to control for partial page */
    switch (s->state)
    {
    case T30_STATE_F_DOC:
        set_state(s, T30_STATE_F_POST_DOC_ECM);
        queue_phase(s, T30_PHASE_D_RX);
        break;
    case T30_STATE_F_POST_DOC_ECM:
        /* Ignore extra RCP frames. The source will usually send several to maximum the chance of
           one getting through OK. */
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_fnv(t30_state_t *s, const uint8_t *msg, int len)
{
    logging_state_t *log;
    const char *x;

    /* Field not valid */
    /* TODO: analyse the message, as per 5.3.6.2.13 */
    if (!span_log_test(&s->logging, SPAN_LOG_FLOW))
        return;
    log = &s->logging;

    if ((msg[3] & 0x01))
        span_log(log, SPAN_LOG_FLOW, "  Incorrect password (PWD).\n");
    if ((msg[3] & 0x02))
        span_log(log, SPAN_LOG_FLOW, "  Selective polling reference (SEP) not known.\n");
    if ((msg[3] & 0x04))
        span_log(log, SPAN_LOG_FLOW, "  Subaddress (SUB) not known.\n");
    if ((msg[3] & 0x08))
        span_log(log, SPAN_LOG_FLOW, "  Sender identity (SID) not known.\n");
    if ((msg[3] & 0x10))
        span_log(log, SPAN_LOG_FLOW, "  Secure fax error.\n");
    if ((msg[3] & 0x20))
        span_log(log, SPAN_LOG_FLOW, "  Transmitting subscriber identity (TSI) not accepted.\n");
    if ((msg[3] & 0x40))
        span_log(log, SPAN_LOG_FLOW, "  Polled subaddress (PSA) not known.\n");
    if (len > 4  &&  (msg[3] & DISBIT8))
    {
        if ((msg[4] & 0x01))
            span_log(log, SPAN_LOG_FLOW, "  BFT negotiations request not accepted.\n");
        if ((msg[4] & 0x02))
            span_log(log, SPAN_LOG_FLOW, "  Internet routing address (IRA) not known.\n");
        if ((msg[4] & 0x04))
            span_log(log, SPAN_LOG_FLOW, "  Internet selective polling address (ISP) not known.\n");
    }
    if (len > 5)
    {
        span_log(log, SPAN_LOG_FLOW, "  FNV sequence number %d.\n", msg[5]);
    }
    if (len > 6)
    {
        switch (msg[6])
        {
        case 0x83:
            x = "Incorrect password (PWD)";
            break;
        case 0x85:
            x = "Selective polling reference (SEP) not known";
            break;
        case 0x43:
        case 0xC3:
            x = "Subaddress (SUB) not known";
            break;
        case 0x45:
        case 0xC5:
            x = "Sender identity (SID) not known";
            break;
        case 0x10:
            x = "Secure fax error";
            break;
        case 0x42:
        case 0xC2:
            x = "Transmitting subscriber identity (TSI) not accepted";
            break;
        case 0x86:
            x = "Polled subaddress (PSA) not known";
            break;
        default:
            x = "???";
            break;
        }
        span_log(log, SPAN_LOG_FLOW, "  FNV diagnostic info type %s.\n", x);
    }
    if (len > 7)
    {
        span_log(log, SPAN_LOG_FLOW, "  FNV length %d.\n", msg[7]);
    }
    /* We've decoded it, but we don't yet know how to deal with it, so treat it as unexpected */
    unexpected_final_frame(s, msg, len);
}
/*- End of function --------------------------------------------------------*/

static void process_rx_pps(t30_state_t *s, const uint8_t *msg, int len)
{
    int fcf2;
    int page;
    int block;
    int i;
    int j;
    int frame_no;
    int first_bad_frame;
    
    /* Partial page signal */
    switch (s->state)
    {
    case T30_STATE_F_DOC:
    case T30_STATE_F_POST_DOC_ECM:
        if (len >= 7)
        {
            fcf2 = msg[3] & 0xFE;
            page = msg[4];
            block = msg[5];
            s->ecm_frames = msg[6] + 1;
            span_log(&s->logging, SPAN_LOG_FLOW, "Received PPS + %s\n", t30_frametype(msg[3]));
            /* Build a bit map of which frames we now have stored OK */
            frame_no = 0;
            first_bad_frame = 256;
            for (i = 3;  i < 3 + 32;  i++)
            {
                s->ecm_frame_map[i] = 0;
                for (j = 0;  j < 8;  j++)
                {
                    if (s->ecm_len[frame_no] < 0)
                    {   
                        s->ecm_frame_map[i] |= (1 << j);
                        if (frame_no < first_bad_frame)
                            first_bad_frame = frame_no;
                    }
                    frame_no++;
                }
            }
            /* Now, are there really bad frames, or does our scan represent things being OK? */
            queue_phase(s, T30_PHASE_D_TX);
            if (first_bad_frame >= s->ecm_frames)
            {
                /* Everything was OK. We can accept the data and move on. */
                switch (fcf2)
                {
                case T30_NULL:
                    /* We can confirm this partial page. */
                    t30_ecm_commit_partial_page(s);
                    set_state(s, T30_STATE_F_POST_RCP_MCF);
                    send_simple_frame(s, T30_MCF);
                    break;
                case T30_EOP:
                case T30_EOM:
                case T30_MPS:
                case T30_PRI_EOP:
                case T30_PRI_EOM:
                case T30_PRI_MPS:
                    /* We can confirm the whole page. */
                    s->next_rx_step = fcf2;
                    t30_ecm_commit_partial_page(s);
                    t4_rx_end_page(&(s->t4));
                    if (s->phase_d_handler)
                        s->phase_d_handler(s, s->phase_d_user_data, fcf2);
                    rx_start_page(s);
                    set_state(s, T30_STATE_F_POST_RCP_MCF);
                    send_simple_frame(s, T30_MCF);
                    break;
                default:
                    unexpected_final_frame(s, msg, len);
                    break;
                }
            }
            else
            {
                /* We need to send the PPR frame we have created, to try to fill in the missing/bad data. */
                set_state(s, T30_STATE_F_POST_RCP_PPR);
                s->ecm_frame_map[0] = 0xFF;
                s->ecm_frame_map[1] = 0x13;
                s->ecm_frame_map[2] = T30_PPR;
                send_frame(s, s->ecm_frame_map, 3 + 32);
            }
        }
        else
        {
            span_log(&s->logging, SPAN_LOG_FLOW, "Bad PPS message length %d.\n", len);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_tnr(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Transmit not ready */
    switch (s->state)
    {
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_eor(t30_state_t *s, const uint8_t *msg, int len)
{
    int fcf2;

    /* End of retransmission */
    /* Partial page signal */
    switch (s->state)
    {
    case T30_STATE_F_DOC:
    case T30_STATE_F_POST_DOC_ECM:
        if (len == 4)
        {
            fcf2 = msg[3] & 0xFE;
            span_log(&s->logging, SPAN_LOG_FLOW, "Received EOR + %s\n", t30_frametype(msg[3]));
            switch (fcf2)
            {
            case T30_NULL:
                break;
            case T30_PRI_EOM:
            case T30_PRI_MPS:
            case T30_PRI_EOP:
                /* TODO: Alert operator */
                /* Fall through */
            case T30_EOM:
            case T30_MPS:
            case T30_EOP:
                s->next_rx_step = fcf2;
                send_simple_frame(s, T30_ERR);
                break;
            default:
                unexpected_final_frame(s, msg, len);
                break;
            }
        }
        else
        {
            unexpected_frame_length(s, msg, len);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_fdm(t30_state_t *s, const uint8_t *msg, int len)
{
    /* File diagnostics message */
    switch (s->state)
    {
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_mcf(t30_state_t *s, const uint8_t *msg, int len)
{
    t4_stats_t stats;

    /* Message confirmation */
    switch (s->state)
    {
    case T30_STATE_II_Q:
        switch (s->next_tx_step)
        {
        case T30_MPS:
        case T30_PRI_MPS:
            s->retries = 0;
            t4_tx_end_page(&(s->t4));
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_MCF);
            t4_tx_start_page(&(s->t4));
            set_state(s, T30_STATE_I);
            queue_phase(s, T30_PHASE_C_NON_ECM_TX);
            break;
        case T30_EOM:
        case T30_PRI_EOM:
            s->retries = 0;
            t4_tx_end_page(&(s->t4));
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_MCF);
            t4_tx_end(&(s->t4));
            set_state(s, T30_STATE_R);
            if (span_log_test(&s->logging, SPAN_LOG_FLOW))
            {
                t4_get_transfer_statistics(&(s->t4), &stats);
                span_log(&s->logging, SPAN_LOG_FLOW, "Success - delivered %d pages\n", stats.pages_transferred);
            }
            break;
        case T30_EOP:
        case T30_PRI_EOP:
            s->retries = 0;
            t4_tx_end_page(&(s->t4));
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_MCF);
            t4_tx_end(&(s->t4));
            send_dcn(s);
            if (span_log_test(&s->logging, SPAN_LOG_FLOW))
            {
                t4_get_transfer_statistics(&(s->t4), &stats);
                span_log(&s->logging, SPAN_LOG_FLOW, "Success - delivered %d pages\n", stats.pages_transferred);
            }
            break;
        }
        break;
    case T30_STATE_IV_PPS_NULL:
    case T30_STATE_IV_PPS_Q:
    case T30_STATE_IV_PPS_RNR:
        s->retries = 0;
        /* Is there more of the current page to get, or do we move on? */
        span_log(&s->logging, SPAN_LOG_FLOW, "Is there more to send? - %d %d\n", s->ecm_frames, s->ecm_len[255]);
        if (!s->ecm_at_page_end  &&  get_partial_ecm_page(s) > 0)
        {
            span_log(&s->logging, SPAN_LOG_WARNING, "Additional image data to send\n");
            s->ecm_block++;
            set_state(s, T30_STATE_IV);
            queue_phase(s, T30_PHASE_C_ECM_TX);
            s->ecm_current_frame = 0;
            send_next_ecm_frame(s);
        }
        else
        {

            span_log(&s->logging, SPAN_LOG_FLOW, "Moving on to the next page\n");
            switch (s->next_tx_step)
            {
            case T30_MPS:
            case T30_PRI_MPS:
                s->retries = 0;
                t4_tx_end_page(&(s->t4));
                if (s->phase_d_handler)
                    s->phase_d_handler(s, s->phase_d_user_data, T30_MCF);
                t4_tx_start_page(&(s->t4));
                s->ecm_page++;
                s->ecm_block = 0;
                if (get_partial_ecm_page(s) > 0)
                {
                    set_state(s, T30_STATE_IV);
                    queue_phase(s, T30_PHASE_C_ECM_TX);
                    s->ecm_current_frame = 0;
                    send_next_ecm_frame(s);
                }
                break;
            case T30_EOM:
            case T30_PRI_EOM:
                s->retries = 0;
                t4_tx_end_page(&(s->t4));
                if (s->phase_d_handler)
                    s->phase_d_handler(s, s->phase_d_user_data, T30_MCF);
                t4_tx_end(&(s->t4));
                set_state(s, T30_STATE_R);
                if (span_log_test(&s->logging, SPAN_LOG_FLOW))
                {
                    t4_get_transfer_statistics(&(s->t4), &stats);
                    span_log(&s->logging, SPAN_LOG_FLOW, "Success - delivered %d pages\n", stats.pages_transferred);
                }
                break;
            case T30_EOP:
            case T30_PRI_EOP:
                s->retries = 0;
                t4_tx_end_page(&(s->t4));
                if (s->phase_d_handler)
                    s->phase_d_handler(s, s->phase_d_user_data, T30_MCF);
                t4_tx_end(&(s->t4));
                send_dcn(s);
                if (span_log_test(&s->logging, SPAN_LOG_FLOW))
                {
                    t4_get_transfer_statistics(&(s->t4), &stats);
                    span_log(&s->logging, SPAN_LOG_FLOW, "Success - delivered %d pages\n", stats.pages_transferred);
                }
                break;
            }
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_rtp(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Retrain positive */
    s->short_train = FALSE;
    switch (s->state)
    {
    case T30_STATE_II_Q:
        switch (s->next_tx_step)
        {
        case T30_MPS:
        case T30_PRI_MPS:
            s->retries = 0;
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_RTP);
            /* Send fresh training, and then the next page */
            queue_phase(s, T30_PHASE_B_TX);
            restart_sending_document(s);
            break;
        case T30_EOM:
        case T30_PRI_EOM:
            s->retries = 0;
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_RTP);
            /* TODO: should go back to T, and resend */
            set_state(s, T30_STATE_R);
            break;
        case T30_EOP:
        case T30_PRI_EOP:
            s->retries = 0;
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_RTN);
            send_dcn(s);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_rtn(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Retrain negative */
    s->short_train = FALSE;
    switch (s->state)
    {
    case T30_STATE_II_Q:
        switch (s->next_tx_step)
        {
        case T30_MPS:
        case T30_PRI_MPS:
            s->retries = 0;
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_RTN);
            /* Send fresh training, and then repeat the last page */
            queue_phase(s, T30_PHASE_B_TX);
            restart_sending_document(s);
            break;
        case T30_EOM:
        case T30_PRI_EOM:
        case T30_EOP:
        case T30_PRI_EOP:
            s->retries = 0;
            if (s->phase_d_handler)
                s->phase_d_handler(s, s->phase_d_user_data, T30_RTN);
            send_dcn(s);
            break;
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_pip(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Procedure interrupt positive */
    switch (s->state)
    {
    case T30_STATE_II_Q:
    case T30_STATE_IV_PPS_Q:
    case T30_STATE_IV_PPS_RNR:
        s->retries = 0;
        if (s->phase_d_handler)
        {
            s->phase_d_handler(s, s->phase_d_user_data, T30_PIP);
            s->timer_t3 = ms_to_samples(DEFAULT_TIMER_T3);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_pin(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Procedure interrupt negative */
    switch (s->state)
    {
    case T30_STATE_II_Q:
    case T30_STATE_IV_PPS_Q:
    case T30_STATE_IV_PPS_RNR:
    case T30_STATE_IV_EOR:
    case T30_STATE_IV_EOR_RNR:
        s->retries = 0;
        if (s->phase_d_handler)
        {
            s->phase_d_handler(s, s->phase_d_user_data, T30_PIN);
            s->timer_t3 = ms_to_samples(DEFAULT_TIMER_T3);
        }
        break;
    default:
        unexpected_final_frame(s, msg, len);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void process_rx_dcn(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Disconnect */
    /* TODO: test if this is expected or unexpected */
    switch (s->state)
    {
#if 0
    case ??????:
        /* Unexpected DCN while waiting for image data */
        s->current_status = T30_ERR_DCNDATARX;
        break;
#endif
    case T30_STATE_F_POST_DOC_NON_ECM:
        /* Unexpected DCN while waiting for EOM, EOP or MPS */
        s->current_status = T30_ERR_DCNFAXRX;
        break;
    case T30_STATE_II_Q:
        switch (s->next_tx_step)
        {
        case T30_MPS:
        case T30_PRI_MPS:
        case T30_EOM:
        case T30_PRI_EOM:
            /* Unexpected DCN after EOM or MPS sequence */
            s->current_status = T30_ERR_DCNPHDRX;
            break;
        }
        break;
#if 0
    case ??????:
        /* Unexpected DCN after RR/RNR sequence */
        s->current_status = T30_ERR_DCNRRDRX;
        break;
    case ??????:
        /* Unexpected DCN after requested retransmission */
        s->current_status = T30_ERR_DCNNORTNRX;
        break;
#endif
    }
    /* Time to disconnect */
    disconnect(s);
}
/*- End of function --------------------------------------------------------*/

static void process_rx_crp(t30_state_t *s, const uint8_t *msg, int len)
{
    /* Command repeat */
    repeat_last_command(s);
}
/*- End of function --------------------------------------------------------*/

static void hdlc_accept_control_msg(t30_state_t *s, int ok, const uint8_t *msg, int len)
{
    int final_frame;
    char far_password[T30_MAX_IDENT_LEN];
    
    final_frame = msg[1] & 0x10;
    if (!final_frame)
    {
        /* Restart the command or response timer, T2 or T4 */
        s->timer_t2_t4 = ms_to_samples((s->timer_is_t4)  ?  DEFAULT_TIMER_T4  :  DEFAULT_TIMER_T2);

        /* The following handles all the message types we expect to get without
           a final frame tag. If we get one that T.30 says we should not expect
           in a particular context, its pretty harmless, so don't worry. */
        switch (msg[2] & 0xFE)
        {
        case T30_CSI:
            if (msg[2] == T30_CSI)
            {
                /* Called subscriber identification */
                /* OK in (NSF) (CSI) DIS */
                decode_20digit_msg(s, s->far_ident, &msg[2], len - 2);
            }
            else
            {
                /* CIG - Calling subscriber identification */
                /* OK in (NSC) (CIG) DTC */
                /* OK in (PWD) (SEP) (CIG) DTC */
                decode_20digit_msg(s, s->far_ident, &msg[2], len - 2);
            }
            break;
        case T30_NSF:
            if (msg[2] == T30_NSF)
            {
                /* Non-standard facilities */
                /* OK in (NSF) (CSI) DIS */
                if (t35_decode(&msg[3], len - 3, &s->country, &s->vendor, &s->model))
                {
                    if (s->country)
                        span_log(&s->logging, SPAN_LOG_FLOW, "The remote was made in '%s'\n", s->country);
                    if (s->vendor)
                        span_log(&s->logging, SPAN_LOG_FLOW, "The remote was made by '%s'\n", s->vendor);
                    if (s->model)
                        span_log(&s->logging, SPAN_LOG_FLOW, "The remote is a '%s'\n", s->model);
                }
            }
            else
            {
                /* NSC - Non-standard facilities command */
                /* OK in (NSC) (CIG) DTC */
            }
            break;
        case T30_PWD:
            if (msg[2] == T30_PWD)
            {
                /* Password */
                /* OK in (PWD) (SUB) (TSI) DCS */
                /* OK in (PWD) (SEP) (CIG) DTC */
                decode_20digit_msg(s, far_password, &msg[2], len - 2);
                if (strcmp(s->far_password, far_password) == 0)
                    s->far_password_ok = TRUE;  
            }
            else
            {
                unexpected_frame(s, msg, len);
            }
            break;
        case T30_SEP:
            if (msg[2] == T30_SEP)
            {
                /* Selective polling */
                /* OK in (PWD) (SEP) (CIG) DTC */
                decode_20digit_msg(s, s->sep_address, &msg[2], len - 2);
            }
            else
            {
                unexpected_frame(s, msg, len);
            }
            break;
        case T30_PSA:
            if (msg[2] == T30_PSA)
            {
                /* Polled subaddress */
                decode_20digit_msg(s, s->psa_address, &msg[2], len - 2);
            }
            else
            {
                unexpected_frame(s, msg, len);
            }
            break;
        case T30_CIA:
            if (msg[2] == T30_CIA)
            {
                /* Calling subscriber internet address */
                decode_url_msg(s, NULL, &msg[2], len - 2);
            }
            else
            {
                unexpected_frame(s, msg, len);
            }
            break;
        case T30_ISP:
            if (msg[2] == T30_ISP)
            {
                /* Internet selective polling address */
                decode_url_msg(s, NULL, &msg[2], len - 2);
            }
            else
            {
                unexpected_frame(s, msg, len);
            }
            break;
        case T30_TSI:
            /* Transmitting subscriber identity */
            /* OK in (TSI) DCS */
            /* OK in (PWD) (SUB) (TSI) DCS */
            decode_20digit_msg(s, s->far_ident, &msg[2], len - 2);
            break;
        case T30_SUB:
            /* Subaddress */
            /* OK in (PWD) (SUB) (TSI) DCS */
            decode_20digit_msg(s, s->far_sub_address, &msg[2], len - 2);
            break;
        case T30_SID:
            /* Sender Identification */
            /* T.30 does not say where this is OK */
            decode_20digit_msg(s, NULL, &msg[2], len - 2);
            break;
        case T30_CSA:
            /* Calling subscriber internet address */
            decode_url_msg(s, NULL, &msg[2], len - 2);
            break;
        case T30_TSA:
            /* Transmitting subscriber internet address */
            decode_url_msg(s, NULL, &msg[2], len - 2);
            break;
        case T30_IRA:
            /* Internet routing address */
            decode_url_msg(s, NULL, &msg[2], len - 2);
            break;
        case T4_FCD:
            process_rx_fcd(s, msg, len);
            break;
        case T4_RCP:
            process_rx_rcp(s, msg, len);
            break;
        default:
            span_log(&s->logging, SPAN_LOG_FLOW, "Unexpected %s frame\n", t30_frametype(msg[2]));
            break;
        }
    }
    else
    {
        /* Once we have any successful message from the far end, we
           cancel timer T1 */
        s->timer_t0_t1 = 0;

        /* The following handles context sensitive message types, which should
           occur at the end of message sequences. They should, therefore have
           the final frame flag set. */
        span_log(&s->logging, SPAN_LOG_FLOW, "In state %d\n", s->state);
        switch (msg[2] & 0xFE)
        {
        case T30_DIS:
            process_rx_dis_or_dtc(s, msg, len);
            break;
        case T30_DCS:
            process_rx_dcs(s, msg, len);
            break;
        case T30_NSS:
            process_rx_nss(s, msg, len);
            break;
        case T30_CTC:
            process_rx_ctc(s, msg, len);
            break;
        case T30_CFR:
            process_rx_cfr(s, msg, len);
            break;
        case T30_FTT:
            process_rx_ftt(s, msg, len);
            break;
        case T30_CTR:
            process_rx_ctr(s, msg, len);
            break;
        case T30_EOM:
            process_rx_eom(s, msg, len);
            break;
        case T30_MPS:
            process_rx_mps(s, msg, len);
            break;
        case T30_EOP:
            process_rx_eop(s, msg, len);
            break;
        case T30_PRI_EOM:
            process_rx_pri_eom(s, msg, len);
            break;
        case T30_PRI_MPS:
            process_rx_pri_mps(s, msg, len);
            break;
        case T30_PRI_EOP:
            process_rx_pri_eop(s, msg, len);
            break;
        case T30_EOS:
            process_rx_eos(s, msg, len);
            break;
        case T30_PPS:
            process_rx_pps(s, msg, len);
            break;
        case T30_EOR:
            process_rx_eor(s, msg, len);
            break;
        case T30_RR:
            process_rx_rr(s, msg, len);
            break;
        case T30_MCF:
            process_rx_mcf(s, msg, len);
            break;
        case T30_RTP:
            process_rx_rtp(s, msg, len);
            break;
        case T30_RTN:
            process_rx_rtn(s, msg, len);
            break;
        case T30_PIP:
            process_rx_pip(s, msg, len);
            break;
        case T30_PIN:
            process_rx_pin(s, msg, len);
            break;
        case T30_PPR:
            process_rx_ppr(s, msg, len);
            break;
        case T30_RNR:
            process_rx_rnr(s, msg, len);
            break;
        case T30_ERR:
            process_rx_err(s, msg, len);
            break;
        case T30_FDM:
            process_rx_fdm(s, msg, len);
            break;
        case T30_DCN:
            process_rx_dcn(s, msg, len);
            break;
        case T30_CRP:
            process_rx_crp(s, msg, len);
            break;
        case T30_FNV:
            process_rx_fnv(s, msg, len);
            break;
        case T30_TNR:
            process_rx_tnr(s, msg, len);
            break;
        case T30_TR:
            process_rx_tr(s, msg, len);
            break;
        case T4_RCP:
            process_rx_rcp(s, msg, len);
            break;
        default:
            /* We don't know what to do with this. */
            unexpected_final_frame(s, msg, len);
            break;
        }
    }
}
/*- End of function --------------------------------------------------------*/

03081 void t30_hdlc_accept(void *user_data, int ok, const uint8_t *msg, int len)
{
    t30_state_t *s;

    s = (t30_state_t *) user_data;
    if (len < 0)
    {
        /* Special conditions */
        switch (len)
        {
        case PUTBIT_TRAINING_FAILED:
            span_log(&s->logging, SPAN_LOG_FLOW, "HDLC carrier training failed in state %d\n", s->state);
            s->rx_trained = FALSE;
            /* Cancel the timer, since we have actually seen something, and wait until the carrier drops
               before proceeding. */
            // TODO: this is not a complete answer to handling failures to train
            s->timer_t2_t4 = 0;
            break;
        case PUTBIT_TRAINING_SUCCEEDED:
            /* The modem is now trained */
            span_log(&s->logging, SPAN_LOG_FLOW, "HDLC carrier trained in state %d\n", s->state);
            s->rx_signal_present = TRUE;
            s->rx_trained = TRUE;
            break;
        case PUTBIT_CARRIER_UP:
            span_log(&s->logging, SPAN_LOG_FLOW, "HDLC carrier up in state %d\n", s->state);
            s->rx_signal_present = TRUE;
            break;
        case PUTBIT_CARRIER_DOWN:
            span_log(&s->logging, SPAN_LOG_FLOW, "HDLC carrier down in state %d\n", s->state);
            s->rx_signal_present = FALSE;
            s->rx_trained = FALSE;
            /* If a phase change has been queued to occur after the receive signal drops,
               its time to change. */
            if (s->next_phase != T30_PHASE_IDLE)
            {
                set_phase(s, s->next_phase);
                s->next_phase = T30_PHASE_IDLE;
            }
            break;
        case PUTBIT_FRAMING_OK:
            span_log(&s->logging, SPAN_LOG_FLOW, "HDLC framing OK in state %d\n", s->state);
            if (!s->far_end_detected  &&  s->timer_t0_t1 > 0)
            {
                s->timer_t0_t1 = ms_to_samples(DEFAULT_TIMER_T1);
                s->far_end_detected = TRUE;
                if (s->phase == T30_PHASE_A_CED  ||  s->phase == T30_PHASE_A_CNG)
                    set_phase(s, T30_PHASE_B_RX);
            }
            /* 5.4.3.1 Timer T2 is reset if flag is received */
            if (!s->timer_is_t4  &&  s->timer_t2_t4 > 0)
                s->timer_t2_t4 = 0;
            break;
        case PUTBIT_ABORT:
            /* Just ignore these */
            break;
        default:
            span_log(&s->logging, SPAN_LOG_FLOW, "Unexpected HDLC special length - %d!\n", len);
            break;
        }
        return;
    }

    /* The spec. says a command or response is not valid if:
        - any of the frames, optional or mandatory, have an FCS error.
        - any single frame exceeds 3s +- 15% (i.e. no frame should exceed 2.55s)
        - the final frame is not tagged as a final frame
        - the final frame is not a recognised one.
       The first point seems benign. If we accept an optional frame, and a later
       frame is bad, having accepted the optional frame should be harmless.
       The 2.55s maximum seems to limit signalling frames to no more than 95 octets,
       including FCS, and flag octets (assuming the use of V.21).
    */
    if (!ok)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Bad CRC received\n");
        if (s->crp_enabled)
            send_simple_frame(s, T30_CRP);
        return;
    }

    /* Cancel the command or response timer */
    s->timer_t2_t4 = 0;
    if (len < 3)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Bad HDLC frame length - %d\n", len);
        return;
    }
    if (msg[0] != 0xFF  ||  !(msg[1] == 0x03  ||  msg[1] == 0x13))
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Bad HDLC frame header - %02x %02x\n", msg[0], msg[1]);
        return;
    }
    print_frame(s, "Rx: ", msg, len);

    switch (s->phase)
    {
    case T30_PHASE_A_CED:
    case T30_PHASE_A_CNG:
    case T30_PHASE_B_RX:
    case T30_PHASE_C_ECM_RX:
    case T30_PHASE_D_RX:
        break;
    default:
        span_log(&s->logging, SPAN_LOG_FLOW, "Unexpected HDLC frame received in phase %s, state %d\n", phase_names[s->phase], s->state);
        break;
    }
    hdlc_accept_control_msg(s, ok, msg, len);
}
/*- End of function --------------------------------------------------------*/

static void queue_phase(t30_state_t *s, int phase)
{
    if (s->rx_signal_present)
    {
        /* We need to wait for that signal to go away */
        s->next_phase = phase;
    }
    else
    {
        set_phase(s, phase);
        s->next_phase = T30_PHASE_IDLE;
    }
}
/*- End of function --------------------------------------------------------*/

static void set_phase(t30_state_t *s, int phase)
{
    if (phase != s->phase)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Changing from phase %s to %s\n", phase_names[s->phase], phase_names[phase]);
        /* We may be killing a receiver before it has declared the end of the
           signal. Force the signal present indicator to off, because the
           receiver will never be able to. */
        if (s->phase != T30_PHASE_A_CED  &&  s->phase != T30_PHASE_A_CNG)
            s->rx_signal_present = FALSE;
        s->rx_trained = FALSE;
        s->phase = phase;
        switch (phase)
        {
        case T30_PHASE_A_CED:
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_V21, FALSE, TRUE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_CED, FALSE, FALSE);
            break;
        case T30_PHASE_A_CNG:
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_V21, FALSE, TRUE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_CNG, FALSE, FALSE);
            break;
        case T30_PHASE_B_RX:
        case T30_PHASE_D_RX:
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_V21, FALSE, TRUE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_NONE, FALSE, FALSE);
            break;
        case T30_PHASE_B_TX:
        case T30_PHASE_D_TX:
            if (!s->far_end_detected  &&  s->timer_t0_t1 > 0)
            {
                s->timer_t0_t1 = ms_to_samples(DEFAULT_TIMER_T1);
                s->far_end_detected = TRUE;
            }
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_NONE, FALSE, FALSE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_V21, FALSE, TRUE);
            break;
        case T30_PHASE_C_NON_ECM_RX:
            s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T2);
            s->timer_is_t4 = FALSE;
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, fallback_sequence[s->current_fallback].modem_type, s->short_train, FALSE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_NONE, FALSE, FALSE);
            break;
        case T30_PHASE_C_NON_ECM_TX:
            /* Pause before switching from anything to phase C */
            /* Always prime the training count for 1.5s of data at the current rate. Its harmless if
               we prime it and are not doing TCF. */
            s->training_test_bits = (3*fallback_sequence[s->current_fallback].bit_rate)/2;
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_NONE, FALSE, FALSE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, fallback_sequence[s->current_fallback].modem_type, s->short_train, FALSE);
            break;
        case T30_PHASE_C_ECM_RX:
            s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T2);
            s->timer_is_t4 = FALSE;
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, fallback_sequence[s->current_fallback].modem_type, s->short_train, TRUE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_NONE, FALSE, FALSE);
            break;
        case T30_PHASE_C_ECM_TX:
            /* Pause before switching from anything to phase C */
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_NONE, FALSE, FALSE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, fallback_sequence[s->current_fallback].modem_type, s->short_train, TRUE);
            break;
        case T30_PHASE_E:
            /* Send a little silence before ending things, to ensure the
               buffers are all flushed through, and the far end has seen
               the last message we sent. */
            s->training_current_zeros = 0;
            s->training_most_zeros = 0;
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_NONE, FALSE, FALSE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_PAUSE, 200, FALSE);
            break;
        case T30_PHASE_CALL_FINISHED:
            if (s->set_rx_type_handler)
                s->set_rx_type_handler(s->set_rx_type_user_data, T30_MODEM_DONE, FALSE, FALSE);
            if (s->set_tx_type_handler)
                s->set_tx_type_handler(s->set_tx_type_user_data, T30_MODEM_DONE, FALSE, FALSE);
            break;
        }
    }
}
/*- End of function --------------------------------------------------------*/

static void set_state(t30_state_t *s, int state)
{
    if (s->state != state)
    {
        span_log(&s->logging, SPAN_LOG_FLOW, "Changing from state %d to %d\n", s->state, state);
        s->state = state;
        s->step = 0;
    }
}
/*- End of function --------------------------------------------------------*/

03318 void t30_receive_complete(void *user_data)
{
    t30_state_t *s;
    
    s = (t30_state_t *) user_data;

    span_log(&s->logging, SPAN_LOG_FLOW, "Receive complete in phase %s, state %d\n", phase_names[s->phase], s->state);
    /* Usually receive complete is notified by a carrier down signal. However,
       in cases like a T.38 packet stream dying in the middle of reception
       there needs to be a means to stop things. */
    if (s->phase == T30_PHASE_C_NON_ECM_RX)
        t30_non_ecm_put_bit(s, PUTBIT_CARRIER_DOWN);
    else
        t30_hdlc_accept(s, TRUE, NULL, PUTBIT_CARRIER_DOWN);
}
/*- End of function --------------------------------------------------------*/

03335 void t30_send_complete(void *user_data)
{
    t30_state_t *s;
    
    s = (t30_state_t *) user_data;

    span_log(&s->logging, SPAN_LOG_FLOW, "Send complete in phase %s, state %d\n", phase_names[s->phase], s->state);
    /* We have finished sending our messages, so move on to the next operation. */
    switch (s->state)
    {
    case T30_STATE_ANSWERING:
        span_log(&s->logging, SPAN_LOG_FLOW, "Starting answer mode\n");
        set_phase(s, T30_PHASE_B_TX);
        s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T2);
        s->timer_is_t4 = FALSE;
        set_state(s, T30_STATE_R);
        s->dis_received = FALSE;
        send_dis_or_dtc_sequence(s);
        break;
    case T30_STATE_R:
        switch (s->step)
        {
        case 0:
            s->step++;
            if (send_ident_frame(s, T30_CSI))
                break;
            /* Fall through */
        case 1:
            s->step++;
            set_dis_or_dtc(s);
            send_frame(s, s->dis_dtc_frame, s->dis_dtc_len);
            break;
        case 2:
            s->step++;
            if (s->send_hdlc_handler)
                s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
            break;        
        default:
            /* Wait for an acknowledgement. */
            set_phase(s, T30_PHASE_B_RX);
            s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T4);
            s->timer_is_t4 = TRUE;
            break;
        }
        break;
    case T30_STATE_F_CFR:
        if (s->step == 0)
        {
            if (s->send_hdlc_handler)
                s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
            s->step++;
        }
        else
        {
            set_state(s, T30_STATE_F_DOC);
            set_phase(s, (s->error_correcting_mode)  ?  T30_PHASE_C_ECM_RX  : T30_PHASE_C_NON_ECM_RX);
            s->next_rx_step = T30_MPS;
        }
        break;
    case T30_STATE_F_FTT:
        if (s->step == 0)
        {
            if (s->send_hdlc_handler)
                s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
            s->step++;
        }
        else
        {
            set_phase(s, T30_PHASE_B_RX);
            s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T4);
            s->timer_is_t4 = TRUE;
        }
        break;
    case T30_STATE_III_Q_MCF:
    case T30_STATE_III_Q_RTP:
    case T30_STATE_III_Q_RTN:
    case T30_STATE_F_POST_RCP_PPR:
    case T30_STATE_F_POST_RCP_MCF:
        if (s->step == 0)
        {
            if (s->send_hdlc_handler)
                s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
            s->step++;
        }
        else
        {
            switch (s->next_rx_step)
            {
            case T30_MPS:
            case T30_PRI_MPS:
                set_state(s, T30_STATE_F_DOC);
                set_phase(s, (s->error_correcting_mode)  ?  T30_PHASE_C_ECM_RX  : T30_PHASE_C_NON_ECM_RX);
                break;
            case T30_EOM:
            case T30_PRI_EOM:
                /* TODO: */
                disconnect(s);
                break;
            case T30_EOP:
            case T30_PRI_EOP:
                disconnect(s);
                break;
            default:
                span_log(&s->logging, SPAN_LOG_FLOW, "Unknown next rx step - %d\n", s->next_rx_step);
                disconnect(s);
                break;
            }
        }
        break;
    case T30_STATE_II_Q:
    case T30_STATE_IV_PPS_NULL:
    case T30_STATE_IV_PPS_Q:
        if (s->step == 0)
        {
            if (s->send_hdlc_handler)
                s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
            s->step++;
        }
        else
        {
            /* We have finished sending the post image message. Wait for an
               acknowledgement. */
            set_phase(s, T30_PHASE_D_RX);
            s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T4);
            s->timer_is_t4 = TRUE;
        }
        break;
    case T30_STATE_B:
        /* We have now allowed time for the last message to flush
           through the system, so it is safe to report the end of the
           call. */
        if (s->phase_e_handler)
            s->phase_e_handler(s, s->phase_e_user_data, s->current_status);
        set_state(s, T30_STATE_CALL_FINISHED);
        set_phase(s, T30_PHASE_CALL_FINISHED);
        break;
    case T30_STATE_C:
        if (s->step == 0)
        {
            if (s->send_hdlc_handler)
                s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
            s->step++;
        }
        else
        {
            /* We just sent the disconnect message. Now it is time to disconnect */
            disconnect(s);
        }
        break;
    case T30_STATE_D:
        switch (s->step)
        {
        case 0:
            s->step++;
            if (send_sub_frame(s))
                break;
            /* Fall through */
        case 1:
            s->step++;
            if (send_ident_frame(s, T30_TSI))
                break;
            /* Fall through */
        case 2:
            s->step++;
            send_frame(s, s->dcs_frame, s->dcs_len);
            break;
        case 3:
            s->step++;
            if (s->send_hdlc_handler)
                s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
            break;        
        default:
            if ((s->iaf & T30_IAF_MODE_NO_TCF))
            {
                /* Skip the trainability test */
                s->retries = 0;
                s->short_train = TRUE;
                if (s->error_correcting_mode)
                {
                    set_state(s, T30_STATE_IV);
                    queue_phase(s, T30_PHASE_C_ECM_TX);
                }
                else
                {
                    set_state(s, T30_STATE_I);
                    queue_phase(s, T30_PHASE_C_NON_ECM_TX);
                }
            }
            else
            {
                /* Do the trainability test */
                set_state(s, T30_STATE_D_TCF);
                set_phase(s, T30_PHASE_C_NON_ECM_TX);
            }
            break;
        }
        break;
    case T30_STATE_D_TCF:
        /* Finished sending training test. Listen for the response. */
        set_phase(s, T30_PHASE_B_RX);
        s->timer_t2_t4 = ms_to_samples(DEFAULT_TIMER_T4);
        s->timer_is_t4 = TRUE;
        set_state(s, T30_STATE_D_POST_TCF);
        break;
    case T30_STATE_I:
        /* Send the end of page message */
        set_phase(s, T30_PHASE_D_TX);
        set_state(s, T30_STATE_II_Q);
        /* We might need to resend the page we are on, but we need to check if there
           are any more pages to send, so we can send the correct signal right now. */
        send_simple_frame(s, s->next_tx_step = check_next_tx_step(s));
        break;
    case T30_STATE_IV:
        /* We have finished sending an FCD frame */
        if (s->step == 0)
        {
            if (send_next_ecm_frame(s))
            {
                if (s->send_hdlc_handler)
                    s->send_hdlc_handler(s->send_hdlc_user_data, NULL, 0);
                s->step++;
            }
        }
        else
        {
            /* Send the end of page or partial page message */
            set_phase(s, T30_PHASE_D_TX);
            s->next_tx_step = check_next_tx_step(s);
            if (send_pps_frame(s) == T30_NULL)
                set_state(s, T30_STATE_IV_PPS_NULL);
            else
                set_state(s, T30_STATE_IV_PPS_Q);
        }
        break;
    case T30_STATE_CALL_FINISHED:
        /* Just ignore anything that happens now. We might get here if a premature
           disconnect from the far end overlaps something. */
        break;
    default:
        span_log(&s->logging, SPAN_LOG_FLOW, "Bad state in t30_send_complete - %d\n", s->state);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void repeat_last_command(t30_state_t *s)
{
    switch (s->state)
    {
    case T30_STATE_R:
        set_phase(s, T30_PHASE_B_TX);
        s->dis_received = FALSE;
        send_dis_or_dtc_sequence(s);
        break;
    case T30_STATE_III_Q_MCF:
        set_phase(s, T30_PHASE_D_TX);
        send_simple_frame(s, T30_MCF);
        break;
    case T30_STATE_III_Q_RTP:
        set_phase(s, T30_PHASE_D_TX);
        send_simple_frame(s, T30_RTP);
        break;
    case T30_STATE_III_Q_RTN:
        set_phase(s, T30_PHASE_D_TX);
        send_simple_frame(s, T30_RTN);
        break;
    case T30_STATE_II_Q:
        set_phase(s, T30_PHASE_D_TX);
        send_simple_frame(s, s->next_tx_step);
        break;
    case T30_STATE_IV_PPS_NULL:
    case T30_STATE_IV_PPS_Q:
        set_phase(s, T30_PHASE_D_TX);
        send_pps_frame(s);
        break;
    case T30_STATE_IV_PPS_RNR:
    case T30_STATE_IV_EOR_RNR:
        set_phase(s, T30_PHASE_D_TX);
        send_simple_frame(s, T30_RNR);
        break;
    case T30_STATE_D:
        send_dcs_sequence(s);
        break;
    case T30_STATE_F_FTT:
        set_phase(s, T30_PHASE_B_TX);
        send_simple_frame(s, T30_FTT);
        break;
    case T30_STATE_F_CFR:
        set_phase(s, T30_PHASE_B_TX);
        send_simple_frame(s, T30_CFR);
        break;
    default:
        span_log(&s->logging, SPAN_LOG_FLOW, "Repeat command called with nothing to repeat - phase %s, state %d\n", phase_names[s->phase], s->state);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void timer_t0_expired(t30_state_t *s)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "T0 timeout in state %d\n", s->state);
    s->current_status = T30_ERR_T0EXPIRED;
    /* Just end the call */
    disconnect(s);
}
/*- End of function --------------------------------------------------------*/

static void timer_t1_expired(t30_state_t *s)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "T1 timeout in state %d\n", s->state);
    /* The initial connection establishment has timeout out. In other words, we
       have been unable to communicate successfully with a remote machine.
       It is time to abandon the call. */
    s->current_status = T30_ERR_T1EXPIRED;
    switch (s->state)
    {
    case T30_STATE_T:
        /* Just end the call */
        disconnect(s);
        break;
    case T30_STATE_R:
        /* Send disconnect, and then end the call. Since we have not
           successfully contacted the far end, it is unclear why we should
           send a disconnect message at this point. However, it is what T.30
           says we should do. */
        send_dcn(s);
        break;
    }
}
/*- End of function --------------------------------------------------------*/

static void timer_t2_expired(t30_state_t *s)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "T2 timeout in phase %s, state %d\n", phase_names[s->phase], s->state);
    switch (s->state)
    {
    case T30_STATE_F_DOC:
        /* While waiting for FAX page */
        s->current_status = T30_ERR_T2EXPFAXRX;
        break;
    case T30_STATE_F_POST_DOC_NON_ECM:
        /* While waiting for next FAX page */
        s->current_status = T30_ERR_T2EXPMPSRX;
        break;
#if 0
    case ??????:
        /* While waiting for DCN */
        s->current_status = T30_ERR_T2EXPDCNRX;
        break;
    case ??????:
        /* While waiting for phase D */
        s->current_status = T30_ERR_T2EXPDRX;
        break;
#endif
    case T30_STATE_IV_PPS_RNR:
    case T30_STATE_IV_EOR_RNR:
        /* While waiting for RR command */
        s->current_status = T30_ERR_T2EXPRRRX;
        break;
    case T30_STATE_R:
        /* While waiting for NSS, DCS or MCF */
        s->current_status = T30_ERR_T2EXPRX;
        break;
    }
    set_phase(s, T30_PHASE_B_TX);
    start_receiving_document(s);
}
/*- End of function --------------------------------------------------------*/

static void timer_t3_expired(t30_state_t *s)
{
    span_log(&s->logging, SPAN_LOG_FLOW, "T3 timeout in phase %s, state %d\n", phase_names[s->phase], s->state);
    s->current_status = T30_ERR_T3EXPIRED;
    disconnect(s);
}
/*- End of function --------------------------------------------------------*/

static void timer_t4_expired(t30_state_t *s)
{
    /* There was no response (or only a corrupt response) to a command */
    span_log(&s->logging, SPAN_LOG_FLOW, "T4 timeout in phase %s, state %d\n", phase_names[s->phase], s->state);
    if (++s->retries > MAX_MESSAGE_TRIES)
    {
        s->current_status = T30_ERR_RETRYDCN;
        send_dcn(s);
        return;
    }
    repeat_last_command(s);
}
/*- End of function --------------------------------------------------------*/

static void timer_t5_expired(t30_state_t *s)
{
    /* Give up waiting for the receiver to become ready in error correction mode */
    send_dcn(s);
}
/*- End of function --------------------------------------------------------*/

03733 void t30_timer_update(t30_state_t *s, int samples)
{
    if (s->timer_t0_t1 > 0)
    {
        s->timer_t0_t1 -= samples;
        if (s->timer_t0_t1 <= 0)
        {
            if (s->far_end_detected)
                timer_t1_expired(s);
            else
                timer_t0_expired(s);
        }
    }
    if (s->timer_t3 > 0)
    {
        s->timer_t3 -= samples;
        if (s->timer_t3 <= 0)
            timer_t3_expired(s);
    }
    if (s->timer_t2_t4 > 0)
    {
        s->timer_t2_t4 -= samples;
        if (s->timer_t2_t4 <= 0)
        {
            if (s->timer_is_t4)
                timer_t4_expired(s);
            else
                timer_t2_expired(s);
        }
    }
    if (s->timer_t5 > 0)
    {
        s->timer_t5 -= samples;
        if (s->timer_t5 <= 0)
            timer_t5_expired(s);
    }
}
/*- End of function --------------------------------------------------------*/

static void decode_20digit_msg(t30_state_t *s, char *msg, const uint8_t *pkt, int len)
{
    int p;
    int k;
    char text[20 + 1];

    if (msg == NULL)
        msg = text;
    if (len > T30_MAX_IDENT_LEN)
    {
        unexpected_frame_length(s, pkt, len);
        msg[0] = '\0';
        return;
    }
    p = len;
    /* Strip trailing spaces */
    while (p > 1  &&  pkt[p - 1] == ' ')
        p--;
    /* The string is actually backwards in the message */
    k = 0;
    while (p > 1)
        msg[k++] = pkt[--p];
    msg[k] = '\0';
    span_log(&s->logging, SPAN_LOG_FLOW, "Remote fax gave %s as: \"%s\"\n", t30_frametype(pkt[0]), msg);
}
/*- End of function --------------------------------------------------------*/

static void decode_url_msg(t30_state_t *s, char *msg, const uint8_t *pkt, int len)
{
    char text[77 + 1];

    /* TODO: decode properly, as per T.30 5.3.6.2.12 */
    if (msg == NULL)
        msg = text;
    if (len < 3  ||  len > 77 + 3  ||  len != pkt[2] + 3)
    {
        unexpected_frame_length(s, pkt, len);
        msg[0] = '\0';
        return;
    }
    /* First octet is the sequence number of the packet.
            Bit 7 = 1 for more follows, 0 for last packet in the sequence.
            Bits 6-0 = The sequence number, 0 to 0x7F
       Second octet is the type of internet address.
            Bits 7-4 = reserved
            Bits 3-0 = type:
                    0 = reserved
                    1 = e-mail address
                    2 = URL
                    3 = TCP/IP V4
                    4 = TCP/IP V6
                    5 = international phone number, in the usual +... format
                    6-15 = reserved
       Third octet is the length of the internet address
            Bit 7 = 1 for more follows, 0 for last packet in the sequence.
            Bits 6-0 = length
     */
    memcpy(msg, &pkt[3], len - 3);
    msg[len - 3] = '\0';
    span_log(&s->logging, SPAN_LOG_FLOW, "Remote fax gave %s as: %d, %d, \"%s\"\n", t30_frametype(pkt[0]), pkt[0], pkt[1], msg);
}
/*- End of function --------------------------------------------------------*/

03835 const char *t30_frametype(uint8_t x)
{
    switch (x & 0xFE)
    {
    case T30_DIS:
        if (x == T30_DTC)
            return "DTC";
        return "DIS";
    case T30_CSI:
        if (x == T30_CIG)
            return "CIG";
        return "CSI";
    case T30_NSF:
        if (x == T30_NSC)
            return "NSC";
        return "NSF";
    case T30_PWD & 0xFE:
        if (x == T30_PWD)
            return "PWD";
        break;
    case T30_SEP & 0xFE:
        if (x == T30_SEP)
            return "SEP";
        break;
    case T30_PSA & 0xFE:
        if (x == T30_PSA)
            return "PSA";
        break;
    case T30_CIA & 0xFE:
        if (x == T30_CIA)
            return "CIA";
        break;
    case T30_ISP & 0xFE:
        if (x == T30_ISP)
            return "ISP";
        break;
    case T30_DCS:
        return "DCS";
    case T30_TSI:
        return "TSI";
    case T30_NSS:
        return "NSS";
    case T30_SUB:
        return "SUB";
    case T30_SID:
        return "SID";
    case T30_CTC:
        return "CTC";
    case T30_TSA:
        return "TSA";
    case T30_IRA:
        return "IRA";
    case T30_CFR:
        return "CFR";
    case T30_FTT:
        return "FTT";
    case T30_CTR:
        return "CTR";
    case T30_CSA:
        return "CSA";
    case T30_EOM:
        return "EOM";
    case T30_MPS:
        return "MPS";
    case T30_EOP:
        return "EOP";
    case T30_PRI_EOM:
        return "PRI_EOM";
    case T30_PRI_MPS:
        return "PRI_MPS";
    case T30_PRI_EOP:
        return "PRI_EOP";
    case T30_EOS:
        return "EOS";
    case T30_PPS:
        return "PPS";
    case T30_EOR:
        return "EOR";
    case T30_RR:
        return "RR";
    case T30_MCF:
        return "MCF";
    case T30_RTP:
        return "RTP";
    case T30_RTN:
        return "RTN";
    case T30_PIP:
        return "PIP";
    case T30_PIN:
        return "PIN";
    case T30_PPR:
        return "PPR";
    case T30_RNR:
        return "RNR";
    case T30_ERR:
        return "ERR";
    case T30_FDM:
        return "FDM";
    case T30_DCN:
        return "DCN";
    case T30_CRP:
        return "CRP";
    case T30_FNV:
        return "FNV";
    case T30_TNR:
        return "TNR";
    case T30_TR:
        return "TR";
    case T30_PID:
        return "PID";
    case T30_NULL:
        return "NULL";
    case T4_FCD:
        return "FCD";
    case T4_RCP:
        return "RCP";
    }
    return "???";
}
/*- End of function --------------------------------------------------------*/

static void octet_reserved_bit(logging_state_t *log,
                               const uint8_t *msg,
                               int bit_no,
                               int expected)
{
    char s[10] = ".... ....";
    int bit;
    uint8_t octet;
    
    /* Break out the octet and the bit number within it. */
    octet = msg[((bit_no - 1) >> 3) + 3];
    bit_no = (bit_no - 1) & 7;
    /* Now get the actual bit. */
    bit = (octet >> bit_no) & 1;
    /* Is it what it should be. */
    if (bit ^ expected)
    {
        /* Only log unexpected values. */
        s[7 - bit_no + ((bit_no < 4)  ?  1  :  0)] = bit + '0';
        span_log(log, SPAN_LOG_FLOW, "  %s= Unexpected state for reserved bit: %d\n", s, bit);
    }
}
/*- End of function --------------------------------------------------------*/

static void octet_bit_field(logging_state_t *log,
                            const uint8_t *msg,
                            int bit_no,
                            const char *desc,
                            const char *yeah,
                            const char *neigh)
{
    char s[10] = ".... ....";
    int bit;
    uint8_t octet;
    const char *tag;

    /* Break out the octet and the bit number within it. */
    octet = msg[((bit_no - 1) >> 3) + 3];
    bit_no = (bit_no - 1) & 7;
    /* Now get the actual bit. */
    bit = (octet >> bit_no) & 1;
    /* Edit the bit string for display. */
    s[7 - bit_no + ((bit_no < 4)  ?  1  :  0)] = bit + '0';
    /* Find the right tag to display. */
    if (bit)
    {
        if ((tag = yeah) == NULL)
            tag = "Set";
    }
    else
    {
        if ((tag = neigh) == NULL)
            tag = "Not set";
    }
    /* Eh, voila! */
    span_log(log, SPAN_LOG_FLOW, "  %s= %s: %s\n", s, desc, tag);
}
/*- End of function --------------------------------------------------------*/

static void octet_field(logging_state_t *log,
                        const uint8_t *msg,
                        int start,
                        int end,
                        const char *desc,
                        const value_string_t tags[])
{
    char s[10] = ".... ....";
    int i;
    uint8_t octet;
    const char *tag;
    
    /* Break out the octet and the bit number range within it. */
    octet = msg[((start - 1) >> 3) + 3];
    start = (start - 1) & 7;
    end = ((end - 1) & 7) + 1;

    /* Edit the bit string for display. */
    for (i = start;  i < end;  i++)
        s[7 - i + ((i < 4)  ?  1  :  0)] = ((octet >> i) & 1) + '0';

    /* Find the right tag to display. */
    octet = (octet >> start) & ((0xFF + (1 << (end - start))) & 0xFF);
    tag = "Invalid";
    for (i = 0;  tags[i].str;  i++)
    {
        if (octet == tags[i].val)
        {
            tag = tags[i].str;
            break;
        }
    }
    /* Eh, voila! */
    span_log(log, SPAN_LOG_FLOW, "  %s= %s: %s\n", s, desc, tag);
}
/*- End of function --------------------------------------------------------*/

04052 void t30_decode_dis_dtc_dcs(t30_state_t *s, const uint8_t *pkt, int len)
{
    logging_state_t *log;
    uint8_t frame_type;
    static const value_string_t available_signalling_rate_tags[] =
    {
        { 0x00, "V.27 ter fall-back mode" },
        { 0x01, "V.29" },
        { 0x02, "V.27 ter" },
        { 0x03, "V.27 ter and V.29" },
        { 0x0B, "V.27 ter, V.29, and V.17" },
        { 0x06, "Reserved" },
        { 0x0A, "Reserved" },
        { 0x0E, "Reserved" },
        { 0x0F, "Reserved" },
        { 0x04, "Not used" },
        { 0x05, "Not used" },
        { 0x08, "Not used" },
        { 0x09, "Not used" },
        { 0x0C, "Not used" },
        { 0x0D, "Not used" },
        { 0x00, NULL }
    };
    static const value_string_t selected_signalling_rate_tags[] =
    {
        { 0x00, "V.27ter 2400bps" },
        { 0x01, "V.29, 9600bps" },
        { 0x02, "V.27ter 4800bps" },
        { 0x03, "V.29 7200bps" },
        { 0x08, "V.17 14400bps" },
        { 0x09, "V.17 9600bps" },
        { 0x0A, "V.17 12000bps" },
        { 0x0B, "V.17 7200bps" },
        { 0x05, "Reserved" },
        { 0x07, "Reserved" },
        { 0x0C, "Reserved" },
        { 0x0D, "Reserved" },
        { 0x0E, "Reserved" },
        { 0x0F, "Reserved" },
        { 0x00, NULL }
    };
    static const value_string_t available_scan_line_length_tags[] =
    {
        { 0x00, "215 mm +- 1%" },
        { 0x01, "215 mm +- 1% and 255 mm +- 1%" },
        { 0x02, "215 mm +- 1% and 255 mm +- 1% and 303 mm +- 1%" },
        { 0x00, NULL }
    };
    static const value_string_t selected_scan_line_length_tags[] =
    {
        { 0x00, "215 mm +- 1%" },
        { 0x01, "255 mm +- 1%" },
        { 0x02, "303 mm +- 1%" },
        { 0x00, NULL }
    };
    static const value_string_t available_recording_length_tags[] =
    {
        { 0x00, "A4 (297 mm)" },
          { 0x01, "A4 (297 mm) and B4 (364 mm)" },
        { 0x02, "Unlimited" },
        { 0x00, NULL }
    };
    static const value_string_t selected_recording_length_tags[] =
    {
        { 0x00, "A4 (297 mm)" },
        { 0x01, "B4 (364 mm)" },
        { 0x02, "Unlimited" },
        { 0x00, NULL }
    };
    static const value_string_t available_minimum_scan_line_time_tags[] =
    {
        { 0x00, "20 ms at 3.85 l/mm: T7.7 = T3.85" },
        { 0x01, "5 ms at 3.85 l/mm: T7.7 = T3.85" },
        { 0x02, "10 ms at 3.85 l/mm: T7.7 = T3.85" },
        { 0x03, "20 ms at 3.85 l/mm: T7.7 = 1/2 T3.85" },
        { 0x04, "40 ms at 3.85 l/mm: T7.7 = T3.85" },
        { 0x05, "40 ms at 3.85 l/mm: T7.7 = 1/2 T3.85" },
        { 0x06, "10 ms at 3.85 l/mm: T7.7 = 1/2 T3.85" },
        { 0x07, "0 ms at 3.85 l/mm: T7.7 = T3.85" },
        { 0x00, NULL }
    };
    static const value_string_t selected_minimum_scan_line_time_tags[] =
    {
        { 0x00, "20 ms" },
        { 0x01, "40 ms" },
        { 0x02, "10 ms" },
        { 0x04, "5 ms" },
        { 0x07, "0 ms" },
        { 0x00, NULL }
    };
    static const value_string_t shared_data_memory_capacity_tags[] =
    {
        { 0x00, "Not available" },
        { 0x01, "Level 2 = 2.0 Mbytes" },
        { 0x02, "Level 1 = 1.0 Mbytes" },
        { 0x03, "Level 3 = unlimited (i.e. >= 32 Mbytes)" },
        { 0x00, NULL }
    };
    static const value_string_t t89_profile_tags[] =
    {
        { 0x00, "Not used" },
        { 0x01, "Profiles 2 and 3" },
        { 0x02, "Profile 2" },
        { 0x04, "Profile 1" },
        { 0x06, "Profile 3" },
        { 0x03, "Reserved" },
        { 0x05, "Reserved" },
        { 0x07, "Reserved" },
        { 0x00, NULL }
    };
    static const value_string_t t44_mixed_raster_content_tags[] =
    {
        { 0x00, "0" },
        { 0x01, "1" },
        { 0x02, "2" },
        { 0x32, "3" },
        { 0x04, "4" },
        { 0x05, "5" },
        { 0x06, "6" },
        { 0x07, "7" },
        { 0x00, NULL }
    };

    if (!span_log_test(&s->logging, SPAN_LOG_FLOW))
        return;
    frame_type = pkt[2] & 0xFE;
    log = &s->logging;
    if (len <= 2)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }
    
    span_log(log, SPAN_LOG_FLOW, "%s:\n", t30_frametype(pkt[2]));
    if (len <= 3)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }
    octet_bit_field(log, pkt, 1, "Store and forward Internet fax (T.37)", NULL, NULL);
    octet_reserved_bit(log, pkt, 2, 0);
    octet_bit_field(log, pkt, 3, "Real-time Internet fax (T.38)", NULL, NULL);
    octet_bit_field(log, pkt, 4, "3G mobile network", NULL, NULL);
    octet_reserved_bit(log, pkt, 5, 0);
    if (frame_type == T30_DCS)
    {
        octet_reserved_bit(log, pkt, 6, 0);
        octet_reserved_bit(log, pkt, 7, 0);
    }
    else
    {
        octet_bit_field(log, pkt, 6, "V.8 capabilities", NULL, NULL);
        octet_bit_field(log, pkt, 7, "Preferred octets", "64 octets", "256 octets");
    }
    octet_reserved_bit(log, pkt, 8, 0);
    if (len <= 4)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }
    
    if (frame_type == T30_DCS)
        octet_reserved_bit(log, pkt, 9, 0);
    else
        octet_bit_field(log, pkt, 9, "Ready to transmit a fax document (polling)", NULL, NULL);
    octet_bit_field(log, pkt, 10, "Can receive fax", NULL, NULL);
    if (frame_type == T30_DCS)
        octet_field(log, pkt, 11, 14, "Selected data signalling rate", selected_signalling_rate_tags);
    else
        octet_field(log, pkt, 11, 14, "Supported data signalling rates", available_signalling_rate_tags);
    octet_bit_field(log, pkt, 15, "R8x7.7lines/mm and/or 200x200pels/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 16, "2-D coding", NULL, NULL);
    if (len <= 5)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    if (frame_type == T30_DCS)
    {
        octet_field(log, pkt, 17, 18, "Recording width", selected_scan_line_length_tags);
        octet_field(log, pkt, 19, 20, "Recording length", selected_recording_length_tags);
        octet_field(log, pkt, 21, 23, "Minimum scan line time", selected_minimum_scan_line_time_tags);
    }
    else
    {
        octet_field(log, pkt, 17, 18, "Recording width", available_scan_line_length_tags);
        octet_field(log, pkt, 19, 20, "Recording length", available_recording_length_tags);
        octet_field(log, pkt, 21, 23, "Receiver's minimum scan line time", available_minimum_scan_line_time_tags);
    }
    octet_bit_field(log, pkt, 24, "Extension indicator", NULL, NULL);
    if (!(pkt[5] & DISBIT8))
        return;
    if (len <= 6)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_reserved_bit(log, pkt, 25, 0);
    octet_bit_field(log, pkt, 26, "Compressed/uncompressed mode", "Uncompressed", "Compressed");
    octet_bit_field(log, pkt, 27, "Error correction mode (ECM)", "ECM", "Non-ECM");
    if (frame_type == T30_DCS)
        octet_bit_field(log, pkt, 28, "Frame size", "64 octets", "256 octets");
    else
        octet_reserved_bit(log, pkt, 28, 0);
    octet_reserved_bit(log, pkt, 29, 0);
    octet_reserved_bit(log, pkt, 30, 0);
    octet_bit_field(log, pkt, 31, "T.6 coding", NULL, NULL);
    octet_bit_field(log, pkt, 32, "Extension indicator", NULL, NULL);
    if (!(pkt[6] & DISBIT8))
        return;
    if (len <= 7)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 33, "\"Field not valid\" supported", NULL, NULL);
    if (frame_type == T30_DCS)
    {
        octet_reserved_bit(log, pkt, 34, 0);
        octet_reserved_bit(log, pkt, 35, 0);
    }
    else
    {
        octet_bit_field(log, pkt, 34, "Multiple selective polling", NULL, NULL);
        octet_bit_field(log, pkt, 35, "Polled subaddress", NULL, NULL);
    }
    octet_bit_field(log, pkt, 36, "T.43 coding", NULL, NULL);
    octet_bit_field(log, pkt, 37, "Plane interleave", NULL, NULL);
    octet_bit_field(log, pkt, 38, "Voice coding with 32kbit/s ADPCM (Rec. G.726)", NULL, NULL);
    octet_bit_field(log, pkt, 39, "Reserved for the use of extended voice coding set", NULL, NULL);
    octet_bit_field(log, pkt, 40, "Extension indicator", NULL, NULL);
    if (!(pkt[7] & DISBIT8))
        return;
    if (len <= 8)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 41, "R8x15.4lines/mm", NULL, NULL);
    octet_bit_field(log, pkt, 42, "300x300pels/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 43, "R16x15.4lines/mm and/or 400x400pels/25.4 mm", NULL, NULL);
    if (frame_type == T30_DCS)
    {
        octet_bit_field(log, pkt, 44, "Resolution type selection", "Inch", "Metric");
        octet_reserved_bit(log, pkt, 45, 0);
        octet_reserved_bit(log, pkt, 46, 0);
        octet_reserved_bit(log, pkt, 47, 0);
    }
    else
    {
        octet_bit_field(log, pkt, 44, "Inch-based resolution preferred", NULL, NULL);
        octet_bit_field(log, pkt, 45, "Metric-based resolution preferred", NULL, NULL);
        octet_bit_field(log, pkt, 46, "Minimum scan line time for higher resolutions", "T15.4 = 1/2 T7.7", "T15.4 = T7.7");
        octet_bit_field(log, pkt, 47, "Selective polling", NULL, NULL);
    }
    octet_bit_field(log, pkt, 48, "Extension indicator", NULL, NULL);
    if (!(pkt[8] & DISBIT8))
        return;
    if (len <= 9)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 49, "Subaddressing", NULL, NULL);
    if (frame_type == T30_DCS)
    {
        octet_bit_field(log, pkt, 50, "Sender identification transmission", NULL, NULL);
        octet_reserved_bit(log, pkt, 51, 0);
    }
    else
    {
        octet_bit_field(log, pkt, 50, "Password", NULL, NULL);
        octet_bit_field(log, pkt, 51, "Ready to transmit a data file (polling)", NULL, NULL);
    }
    octet_reserved_bit(log, pkt, 52, 0);
    octet_bit_field(log, pkt, 53, "Binary file transfer (BFT)", NULL, NULL);
    octet_bit_field(log, pkt, 54, "Document transfer mode (DTM)", NULL, NULL);
    octet_bit_field(log, pkt, 55, "Electronic data interchange (EDI)", NULL, NULL);
    octet_bit_field(log, pkt, 56, "Extension indicator", NULL, NULL);
    if (!(pkt[9] & DISBIT8))
        return;
    if (len <= 10)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 57, "Basic transfer mode (BTM)", NULL, NULL);
    octet_reserved_bit(log, pkt, 58, 0);
    if (frame_type == T30_DCS)
        octet_reserved_bit(log, pkt, 59, 0);
    else
        octet_bit_field(log, pkt, 59, "Ready to transfer a character or mixed mode document (polling)", NULL, NULL);
    octet_bit_field(log, pkt, 60, "Character mode", NULL, NULL);
    octet_reserved_bit(log, pkt, 61, 0);
    octet_bit_field(log, pkt, 62, "Mixed mode (Annex E/T.4)", NULL, NULL);
    octet_reserved_bit(log, pkt, 63, 0);
    octet_bit_field(log, pkt, 64, "Extension indicator", NULL, NULL);
    if (!(pkt[10] & DISBIT8))
        return;
    if (len <= 11)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 65, "Processable mode 26 (Rec. T.505)", NULL, NULL);
    octet_bit_field(log, pkt, 66, "Digital network capability", NULL, NULL);
    octet_bit_field(log, pkt, 67, "Duplex capability", "Full", "Half only");
    if (frame_type == T30_DCS)
        octet_bit_field(log, pkt, 68, "Full colour mode", NULL, NULL);
    else
        octet_bit_field(log, pkt, 68, "JPEG coding", NULL, NULL);
    octet_bit_field(log, pkt, 69, "Full colour mode", NULL, NULL);
    if (frame_type == T30_DCS)
        octet_bit_field(log, pkt, 70, "Preferred Huffman tables", NULL, NULL);
    else
        octet_reserved_bit(log, pkt, 70, 0);
    octet_bit_field(log, pkt, 71, "12bits/pel component", NULL, NULL);
    octet_bit_field(log, pkt, 72, "Extension indicator", NULL, NULL);
    if (!(pkt[11] & DISBIT8))
        return;
    if (len <= 12)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 73, "No subsampling (1:1:1)", NULL, NULL);
    octet_bit_field(log, pkt, 74, "Custom illuminant", NULL, NULL);
    octet_bit_field(log, pkt, 75, "Custom gamut range", NULL, NULL);
    octet_bit_field(log, pkt, 76, "North American Letter (215.9mm x 279.4mm)", NULL, NULL);
    octet_bit_field(log, pkt, 77, "North American Legal (215.9mm x 355.6mm)", NULL, NULL);
    octet_bit_field(log, pkt, 78, "Single-progression sequential coding (Rec. T.85) basic", NULL, NULL);
    octet_bit_field(log, pkt, 79, "Single-progression sequential coding (Rec. T.85) optional L0", NULL, NULL);
    octet_bit_field(log, pkt, 80, "Extension indicator", NULL, NULL);
    if (!(pkt[12] & DISBIT8))
        return;
    if (len <= 13)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 81, "HKM key management", NULL, NULL);
    octet_bit_field(log, pkt, 82, "RSA key management", NULL, NULL);
    octet_bit_field(log, pkt, 83, "Override", NULL, NULL);
    octet_bit_field(log, pkt, 84, "HFX40 cipher", NULL, NULL);
    octet_bit_field(log, pkt, 85, "Alternative cipher number 2", NULL, NULL);
    octet_bit_field(log, pkt, 86, "Alternative cipher number 3", NULL, NULL);
    octet_bit_field(log, pkt, 87, "HFX40-I hashing", NULL, NULL);
    octet_bit_field(log, pkt, 88, "Extension indicator", NULL, NULL);
    if (!(pkt[13] & DISBIT8))
        return;
    if (len <= 14)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 89, "Alternative hashing system 2", NULL, NULL);
    octet_bit_field(log, pkt, 90, "Alternative hashing system 3", NULL, NULL);
    octet_bit_field(log, pkt, 91, "Reserved for future security features", NULL, NULL);
    octet_field(log, pkt, 92, 94, "T.44 (Mixed Raster Content)", t44_mixed_raster_content_tags);
    octet_bit_field(log, pkt, 95, "Page length maximum stripe size for T.44 (Mixed Raster Content)", NULL, NULL);
    octet_bit_field(log, pkt, 96, "Extension indicator", NULL, NULL);
    if (!(pkt[14] & DISBIT8))
        return;
    if (len <= 15)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 97, "Colour/gray-scale 300pels/25.4mm x 300lines/25.4mm or 400pels/25.4mm x 400lines/25.4mm resolution", NULL, NULL);
    octet_bit_field(log, pkt, 98, "100pels/25.4mm x 100lines/25.4mm for colour/gray scale", NULL, NULL);
    octet_bit_field(log, pkt, 99, "Simple phase C BFT negotiations", NULL, NULL);
    if (frame_type == T30_DCS)
    {
        octet_reserved_bit(log, pkt, 100, 0);
        octet_reserved_bit(log, pkt, 101, 0);
    }
    else
    {
        octet_bit_field(log, pkt, 100, "Extended BFT Negotiations capable", NULL, NULL);
        octet_bit_field(log, pkt, 101, "Internet Selective Polling address (ISP)", NULL, NULL);
    }
    octet_bit_field(log, pkt, 102, "Internet Routing Address (IRA)", NULL, NULL);
    octet_reserved_bit(log, pkt, 103, 0);
    octet_bit_field(log, pkt, 104, "Extension indicator", NULL, NULL);
    if (!(pkt[15] & DISBIT8))
        return;
    if (len <= 16)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 105, "600pels/25.4mm x 600lines/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 106, "1200pels/25.4mm x 1200lines/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 107, "300pels/25.4mm x 600lines/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 108, "400pels/25.4mm x 800lines/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 109, "600pels/25.4mm x 1200lines/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 110, "Colour/gray scale 600pels/25.4mm x 600lines/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 111, "Colour/gray scale 1200pels/25.4mm x 1200lines/25.4mm", NULL, NULL);
    octet_bit_field(log, pkt, 112, "Extension indicator", NULL, NULL);
    if (!(pkt[16] & DISBIT8))
        return;
    if (len <= 17)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 113, "Double sided printing capability (alternate mode)", NULL, NULL);
    octet_bit_field(log, pkt, 114, "Double sided printing capability (continuous mode)", NULL, NULL);
    if (frame_type == T30_DCS)
        octet_bit_field(log, pkt, 115, "Black and white mixed raster content profile (MRCbw)", NULL, NULL);
    else
        octet_reserved_bit(log, pkt, 115, 0);
    octet_bit_field(log, pkt, 116, "T.45 (run length colour encoded)", NULL, NULL);
    octet_field(log, pkt, 117, 118, "Shared memory", shared_data_memory_capacity_tags);
    octet_bit_field(log, pkt, 119, "T.44 colour space", NULL, NULL);
    octet_bit_field(log, pkt, 120, "Extension indicator", NULL, NULL);
    if (!(pkt[17] & DISBIT8))
        return;
    if (len <= 18)
    {
        span_log(log, SPAN_LOG_FLOW, "  Frame is short\n");
        return;
    }

    octet_bit_field(log, pkt, 121, "Flow control capability for T.38 communication", NULL, NULL);
    octet_bit_field(log, pkt, 122, "K>4", NULL, NULL);
    octet_bit_field(log, pkt, 123, "Internet aware T.38 mode fax (not affected by data signal rate bits)", NULL, NULL);
    octet_field(log, pkt, 124, 126, "T.89 (Application profiles for ITU-T Rec T.8)", t89_profile_tags);
    octet_bit_field(log, pkt, 127, "sYCC-JPEG coding", NULL, NULL);
    octet_bit_field(log, pkt, 128, "Extension indicator", NULL, NULL);
    if (!(pkt[18] & DISBIT8))
        return;

    span_log(log, SPAN_LOG_FLOW, "  Extended beyond the current T.30 specification!\n");
}
/*- End of function --------------------------------------------------------*/

04502 int t30_restart(t30_state_t *s)
{
    s->phase = T30_PHASE_IDLE;
    s->next_phase = T30_PHASE_IDLE;
    s->current_fallback = 0;
    s->rx_signal_present = FALSE;
    s->rx_trained = FALSE;
    s->current_status = T30_ERR_OK;
    build_dis_or_dtc(s);
    if (s->calling_party)
    {
        set_state(s, T30_STATE_T);
        set_phase(s, T30_PHASE_A_CNG);
    }
    else
    {
        set_state(s, T30_STATE_ANSWERING);
        set_phase(s, T30_PHASE_A_CED);
    }
    s->far_end_detected = FALSE;
    s->timer_t0_t1 = ms_to_samples(DEFAULT_TIMER_T0);
    return 0;
}
/*- End of function --------------------------------------------------------*/

04527 int t30_init(t30_state_t *s,
             int calling_party,
             t30_set_handler_t *set_rx_type_handler,
             void *set_rx_type_user_data,
             t30_set_handler_t *set_tx_type_handler,
             void *set_tx_type_user_data,
             t30_send_hdlc_handler_t *send_hdlc_handler,
             void *send_hdlc_user_data)
{
    memset(s, 0, sizeof(*s));
    s->calling_party = calling_party;
    s->set_rx_type_handler = set_rx_type_handler;
    s->set_rx_type_user_data = set_rx_type_user_data;
    s->set_tx_type_handler = set_tx_type_handler;
    s->set_tx_type_user_data = set_tx_type_user_data;
    s->send_hdlc_handler = send_hdlc_handler;
    s->send_hdlc_user_data = send_hdlc_user_data;

    /* Default to the basic modems. */
    s->supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29;
    s->supported_compressions = T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION;
    s->supported_resolutions = T30_SUPPORT_STANDARD_RESOLUTION | T30_SUPPORT_FINE_RESOLUTION | T30_SUPPORT_SUPERFINE_RESOLUTION
                             | T30_SUPPORT_R8_RESOLUTION;
    s->supported_image_sizes = T30_SUPPORT_US_LETTER_LENGTH | T30_SUPPORT_US_LEGAL_LENGTH | T30_SUPPORT_UNLIMITED_LENGTH
                             | T30_SUPPORT_215MM_WIDTH;
    span_log_init(&s->logging, SPAN_LOG_NONE, NULL);
    span_log_set_protocol(&s->logging, "T.30");
    t30_restart(s);
    return 0;
}
/*- End of function --------------------------------------------------------*/

04559 void t30_release(t30_state_t *s)
{
    /* Make sure any FAX in progress is tidied up. If the tidying up has
       already happened, repeating it here is harmless. */
    t4_rx_end(&(s->t4));
    t4_tx_end(&(s->t4));
}
/*- End of function --------------------------------------------------------*/

04568 t30_state_t *t30_create(int calling_party,
                        t30_set_handler_t *set_rx_type_handler,
                        void *set_rx_type_user_data,
                        t30_set_handler_t *set_tx_type_handler,
                        void *set_tx_type_user_data,
                        t30_send_hdlc_handler_t *send_hdlc_handler,
                        void *send_hdlc_user_data)
{
    t30_state_t *s;
    
    if ((s = (t30_state_t *) malloc(sizeof(t30_state_t))) == NULL)
        return NULL;
    if (t30_init(s,
                 calling_party,
                 set_rx_type_handler,
                 set_rx_type_user_data,
                 set_tx_type_handler,
                 set_tx_type_user_data,
                 send_hdlc_handler,
                 send_hdlc_user_data))
    {
        free(s);
        return NULL;
    }
    return s;
}
/*- End of function --------------------------------------------------------*/

04596 void t30_free(t30_state_t *s)
{
    t30_release(s);
    free(s);
}
/*- End of function --------------------------------------------------------*/

04603 void t30_terminate(t30_state_t *s)
{
    if (s->phase != T30_PHASE_CALL_FINISHED)
    {
        /* The far end disconnected early, but was it just a tiny bit too early,
           as we were just tidying up, or seriously early as in a failure? */
        switch (s->state)
        {
        case T30_STATE_C:
            /* We were sending the final disconnect, so just hussle things along. */
            disconnect(s);
            break;
        case T30_STATE_B:
            /* We were in the final wait for everything to flush through, so just
               hussle things along. */
            break;
        default:
            /* The call terminated prematurely. */
            s->current_status = T30_ERR_CALLDROPPED;
            break;
        }
        if (s->phase_e_handler)
            s->phase_e_handler(s, s->phase_e_user_data, s->current_status);
        set_state(s, T30_STATE_CALL_FINISHED);
        set_phase(s, T30_PHASE_CALL_FINISHED);
    }
}
/*- End of function --------------------------------------------------------*/

04632 void t30_set_iaf_mode(t30_state_t *s, int iaf)
{
    s->iaf = iaf;
}
/*- End of function --------------------------------------------------------*/

04638 int t30_set_header_info(t30_state_t *s, const char *info)
{
    if (info == NULL)
    {
        s->header_info[0] = '\0';
        return 0;
    }
    if (strlen(info) > 50)
        return -1;
    strcpy(s->header_info, info);
    t4_tx_set_header_info(&(s->t4), s->header_info);
    return 0;
}
/*- End of function --------------------------------------------------------*/

04653 int t30_set_local_ident(t30_state_t *s, const char *id)
{
    if (id == NULL)
    {
        s->local_ident[0] = '\0';
        return 0;
    }
    if (strlen(id) > 20)
        return -1;
    strcpy(s->local_ident, id);
    t4_tx_set_local_ident(&(s->t4), s->local_ident);
    return 0;
}
/*- End of function --------------------------------------------------------*/

int t30_set_local_nsf(t30_state_t *s, const uint8_t *nsf, int len)
{
    if (len > 100)
        return -1;
    memcpy(s->local_nsf, nsf, len);
    s->local_nsf_len = len;
    return 0;
}
/*- End of function --------------------------------------------------------*/

04678 int t30_set_local_sub_address(t30_state_t *s, const char *sub_address)
{
    if (sub_address == NULL)
    {
        s->local_sub_address[0] = '\0';
        return 0;
    }
    if (strlen(sub_address) > 20)
        return -1;
    strcpy(s->local_sub_address, sub_address);
    return 0;
}
/*- End of function --------------------------------------------------------*/

04692 size_t t30_get_sub_address(t30_state_t *s, char *sub_address)
{
    if (sub_address)
        strcpy(sub_address, s->far_sub_address);
    return strlen(s->far_sub_address);
}
/*- End of function --------------------------------------------------------*/

04700 size_t t30_get_header_info(t30_state_t *s, char *info)
{
    if (info)
        strcpy(info, s->header_info);
    return strlen(s->header_info);
}
/*- End of function --------------------------------------------------------*/

04708 size_t t30_get_local_ident(t30_state_t *s, char *id)
{
    if (id)
        strcpy(id, s->local_ident);
    return strlen(s->local_ident);
}
/*- End of function --------------------------------------------------------*/

04716 size_t t30_get_far_ident(t30_state_t *s, char *id)
{
    if (id)
        strcpy(id, s->far_ident);
    return strlen(s->far_ident);
}
/*- End of function --------------------------------------------------------*/

04724 const char *t30_get_far_country(t30_state_t *s)
{
    return s->country;
}
/*- End of function --------------------------------------------------------*/

04730 const char *t30_get_far_vendor(t30_state_t *s)
{
    return s->vendor;
}
/*- End of function --------------------------------------------------------*/

04736 const char *t30_get_far_model(t30_state_t *s)
{
    return s->model;
}
/*- End of function --------------------------------------------------------*/

04742 void t30_get_transfer_statistics(t30_state_t *s, t30_stats_t *t)
{
    t4_stats_t stats;

    t->bit_rate = fallback_sequence[s->current_fallback].bit_rate;
    t->error_correcting_mode = s->error_correcting_mode;
    t4_get_transfer_statistics(&(s->t4), &stats);
    t->pages_transferred = stats.pages_transferred;
    t->width = stats.width;
    t->length = stats.length;
    t->bad_rows = stats.bad_rows;
    t->longest_bad_row_run = stats.longest_bad_row_run;
    t->x_resolution = stats.x_resolution;
    t->y_resolution = stats.y_resolution;
    t->encoding = stats.encoding;
    t->image_size = stats.image_size;
    t->current_status = s->current_status;
}
/*- End of function --------------------------------------------------------*/

04762 void t30_set_phase_b_handler(t30_state_t *s, t30_phase_b_handler_t *handler, void *user_data)
{
    s->phase_b_handler = handler;
    s->phase_b_user_data = user_data;
}
/*- End of function --------------------------------------------------------*/

04769 void t30_set_phase_d_handler(t30_state_t *s, t30_phase_d_handler_t *handler, void *user_data)
{
    s->phase_d_handler = handler;
    s->phase_d_user_data = user_data;
}
/*- End of function --------------------------------------------------------*/

04776 void t30_set_phase_e_handler(t30_state_t *s, t30_phase_e_handler_t *handler, void *user_data)
{
    s->phase_e_handler = handler;
    s->phase_e_user_data = user_data;
}
/*- End of function --------------------------------------------------------*/

04783 void t30_set_document_handler(t30_state_t *s, t30_document_handler_t *handler, void *user_data)
{
    s->document_handler = handler;
    s->document_user_data = user_data;
}
/*- End of function --------------------------------------------------------*/

04790 void t30_set_rx_file(t30_state_t *s, const char *file, int stop_page)
{
    strncpy(s->rx_file, file, sizeof(s->rx_file));
    s->rx_file[sizeof(s->rx_file) - 1] = '\0';
    s->rx_stop_page = stop_page;
}
/*- End of function --------------------------------------------------------*/

04798 void t30_set_tx_file(t30_state_t *s, const char *file, int start_page, int stop_page)
{
    strncpy(s->tx_file, file, sizeof(s->tx_file));
    s->tx_file[sizeof(s->tx_file) - 1] = '\0';
    s->tx_start_page = start_page;
    s->tx_stop_page = stop_page;
}
/*- End of function --------------------------------------------------------*/

04807 void t30_set_supported_modems(t30_state_t *s, int supported_modems)
{
    s->supported_modems = supported_modems;
    build_dis_or_dtc(s);
}
/*- End of function --------------------------------------------------------*/

04814 void t30_set_supported_compressions(t30_state_t *s, int supported_compressions)
{
    s->supported_compressions = supported_compressions;
    build_dis_or_dtc(s);
}
/*- End of function --------------------------------------------------------*/

04821 void t30_set_supported_resolutions(t30_state_t *s, int supported_resolutions)
{
    s->supported_resolutions = supported_resolutions;
    build_dis_or_dtc(s);
}
/*- End of function --------------------------------------------------------*/

04828 void t30_set_supported_image_sizes(t30_state_t *s, int supported_image_sizes)
{
    s->supported_image_sizes = supported_image_sizes;
    build_dis_or_dtc(s);
}
/*- End of function --------------------------------------------------------*/

04835 void t30_set_ecm_capability(t30_state_t *s, int enabled)
{
    s->ecm_allowed = enabled;
    build_dis_or_dtc(s);
}
/*- End of function --------------------------------------------------------*/

04842 void t30_local_interrupt_request(t30_state_t *s, int state)
{
    if (s->timer_t3 > 0)
    {
        /* Accept the far end's outstanding request for interrupt. */
        /* TODO: */
        send_simple_frame(s, (state)  ?  T30_PIP  :  T30_PIN);
    }
    s->local_interrupt_pending = state;
}
/*- End of function --------------------------------------------------------*/
/*- End of file ------------------------------------------------------------*/

Generated by  Doxygen 1.6.0   Back to index